Home › Vehicle Interior › HEATING / AIR CONDITIONING › CONDENSER (for G16E-GTS) › from 2020.09
RM36W0E _58 Vehicle Interior _088019 HEATING / AIR CONDITIONING _0449581 CONDENSER(for G16E-GTS) A

HEATING / AIR CONDITIONING  CONDENSER(for G16E-GTS)  INSTALLATION  


PROCEDURE

Hide 884A0 1.INSTALL COOLER CONDENSER ASSEMBLY

a.
I117117

Engage the guide to install the cooler condenser assembly.

NOTICE:

Do not damage the cooler condenser assembly or radiator assembly when installing the cooler condenser assembly.


HINT:

If a new cooler condenser assembly is installed, add compressor oil to the cooler condenser assembly as follows.


Capacity:

Add 40 cc (1.35 fl. oz)


Compressor Oil:

for HFC-134a(R134a):

ND-OIL 8 or equivalent

for HFO-1234yf(R1234yf):

ND-OIL 12 or equivalent



b.

Install the 3 bolts.


Hide 88710G 2.INSTALL NO. 2 AIR CONDITIONING TUBE AND ACCESSORY ASSEMBLY

a.

Remove the vinyl tape from the No. 2 air conditioner tube and accessory assembly and cooler condenser assembly.


b.

Sufficiently apply compressor oil to a new O-ring and the fitting surface of the No. 2 air conditioner tube and accessory assembly.

Compressor Oil:

for HFC-134a(R134a):

ND-OIL 8 or equivalent

for (HFO-1234yf(R1234yf):

ND-OIL 12 or equivalent



c.

Install the O-ring to the No. 2 air conditioner tube and accessory assembly.

NOTICE:

Keep the O-rings and O-ring fitting surfaces free from foreign matter.



d.

Connect the No. 2 air conditioner tube and accessory assembly to the cooler condenser assembly with the bolt.

Torque:
5.5 N*m (56 kgf*cm, 49 in.*lbf)


Hide 88711 3.INSTALL NO. 1 COOLER REFRIGERANT DISCHARGE HOSE

a.

Remove the vinyl tape from the No. 1 cooler refrigerant discharge hose and cooler condenser assembly.


b.

Sufficiently apply compressor oil to a new O-ring and the fitting surface of the No. 1 cooler refrigerant discharge hose.

Compressor Oil:

for HFC-134a(R134a):

ND-OIL 8 or equivalent

for (HFO-1234yf(R1234yf):

ND-OIL 12 or equivalent



c.

Install the O-ring to the No. 1 cooler refrigerant discharge hose.

NOTICE:

Keep the O-rings and O-ring fitting surfaces free from foreign matter.



d.

Connect the No. 1 cooler refrigerant discharge hose to the cooler condenser assembly with the bolt.

Torque:
5.5 N*m (56 kgf*cm, 49 in.*lbf)


Hide 16595B 4.INSTALL NO. 1 RADIATOR AIR GUIDE LH

Hide 16593B 5.INSTALL NO. 1 RADIATOR AIR GUIDE RH

Hide 16695A 6.INSTALL FRONT RADIATOR SIDE AIR GUIDE PLATE LH

Hide 16691A 7.INSTALL FRONT RADIATOR SIDE AIR GUIDE PLATE RH

HINT:

Use the same procedure as for the LH side.


Hide 53205 9.INSTALL UPPER RADIATOR SUPPORT SUB-ASSEMBLY

Hide 52131A 11.INSTALL FRONT BUMPER REINFORCEMENT

Hide 52611 12.INSTALL FRONT BUMPER ENERGY ABSORBER

Hide 16681A 13.INSTALL RADIATOR UPPER AIR GUIDE PLATE

Hide 17751 14.INSTALL NO. 1 AIR CLEANER INLET

Hide 16.INSTALL HEADLIGHT ASSEMBLY RH

HINT:

Use the same procedure as for the LH side.


Hide 17.CHARGE AIR CONDITIONING SYSTEM WITH REFRIGERANT