Home › Engine / Hybrid System › G16E-GTS (COOLING) › RADIATOR › from 2020.09
RM36W0E _51 Engine / Hybrid System _095909 G16E-GTS COOLING _0449892 RADIATOR A

G16E-GTS COOLING  RADIATOR  INSTALLATION  


PROCEDURE

Hide 1.INSTALL RADIATOR DRAIN COCK PLUG

a.

Install the O-ring to the radiator drain cock plug.

NOTICE:

Replace the O-ring if it is damaged.



b.

Install the radiator drain cock plug.


Hide 16535 2.INSTALL LOWER RADIATOR SUPPORT

a.

Install the 2 lower radiator supports to the radiator assembly.


Hide 16523A 3.INSTALL RADIATOR SUPPORT CUSHION

a.

Install the 2 radiator support cushions to the radiator assembly.


Hide 16400 4.INSTALL RADIATOR ASSEMBLY

a.

Engage the 2 claws and 2 guides to install the fan shroud to the radiator assembly.

NOTICE:

Do not damage the radiator assembly when installing the fan shroud.



b.

Install the radiator assembly together with the fan shroud to the vehicle body.

NOTICE:

Do not apply excessive force to the cooler condenser assembly or pipe when installing the radiator assembly with the fan with motor assembly.



Hide 17940D 5.INSTALL INTERCOOLER ASSEMBLY

Hide 884A0 8.INSTALL COOLER CONDENSER ASSEMBLY

a.

Engage the guide to install the cooler condenser assembly.

NOTICE:

Do not damage the cooler condenser assembly or radiator assembly when installing the cooler condenser assembly.



b.

Install the 3 bolts.


Hide 16572D 9.CONNECT NO. 2 RADIATOR HOSE

a.

Connect the No. 2 radiator hose to the radiator assembly and slide the clip to secure it.


Hide 16571C 10.CONNECT NO. 1 RADIATOR HOSE

a.

Connect the No. 1 radiator hose to the radiator assembly and slide the clip to secure it.


Hide 16267K 11.CONNECT NO. 3 WATER BY-PASS HOSE

a.

Connect the No. 3 water by-pass hose to the radiator assembly and slide the clip to secure it.


Hide 16261 12.CONNECT WATER BY-PASS HOSE

a.

Connect the water by-pass hose to the radiator assembly and slide the clip to secure it.


b.

Engage the clamp.


Hide 16595D 13.INSTALL NO. 1 RADIATOR AIR GUIDE LH

a.

Engage the claw and 2 guide to install the No. 1 radiator air guide LH.


b.

Engage the 2 clamps and connect the wire harness.


Hide 16593B 14.INSTALL NO. 1 RADIATOR AIR GUIDE RH

a.

Engage the claw and 2 guide to install the No. 1 radiator air guide RH.


Hide 16695A 15.INSTALL FRONT RADIATOR SIDE AIR GUIDE PLATE LH

Hide 16691A 16.INSTALL FRONT RADIATOR SIDE AIR GUIDE PLATE RH

Hide 53205 17.INSTALL UPPER RADIATOR SUPPORT SUB-ASSEMBLY

a.

Install the upper front radiator support with the 4 bolts.

Torque:
7.1 N*m (72 kgf*cm, 63 in.*lbf)


b.

Engage the clamp and connect the No. 3 water by-pass hose.


c.

Engage the 3 clamps and connect the wire harness.


d.

Engage the 3 clamps and connect the wire harness.


e.

Connect the horn connector.


f.

Engage the clamp and connect the wire harness.


g.

Connect the hood lock control cable assembly.


h.

Connect the 2 airbag connectors.

NOTICE:

When connecting any airbag connector, take care not to damage the airbag wire harness.


HINT:

Refer to How to Connect or Disconnect Airbag Connector:

Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM>HOW TO CONNECT OR DISCONNECT AIRBAG CONNECTOR



Hide 52131A 19.INSTALL FRONT BUMPER REINFORCEMENT

Hide 53288A 20.INSTALL COOL AIR INTAKE DUCT

a.

Install the cool air intake duct with 3 clips.


Hide 52611 21.INSTALL FRONT BUMPER ENERGY ABSORBER

Hide 16681A 22.INSTALL RADIATOR UPPER AIR GUIDE PLATE

Hide 17751 23.INSTALL NO. 1 AIR CLEANER INLET

a.

Install the No. 1 air cleaner inlet with 2 clips.


Hide 17753 24.INSTALL NO. 3 AIR CLEANER INLET

a.

Engage the 2 claws to install the No. 3 air cleaner inlet.


Hide 26.INSTALL HEADLIGHT ASSEMBLY RH

HINT:

Use the same procedure as for the LH side.


Hide 27.CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

Hide 28.ADD ENGINE COOLANT

Hide 51410 30.INSTALL NO. 1 ENGINE UNDER COVER ASSEMBLY

Hide 53301 32.INSPECT HOOD SUB-ASSEMBLY

Hide 53510 33.ADJUST HOOD LOCK ASSEMBLY

Hide 34. INITIALIZATION AFTER RECONNECTING BATTERY TERMINAL

Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>WORK PROCEDURE

HINT:

When disconnecting and reconnecting the auxiliary battery, there is an automatic learning function that completes learning when the respective system is used.

Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>AUTOMATIC LEARNING CHART