Wear protective gloves. Sharp areas on the parts may injure your hands.
Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
Use the same procedure for the driver side and front passenger side.
The procedure listed below is for the driver side.
Use the same procedure for sports seat type and soprty seat type.
The procedure listed below is for sports seat type.
73240
1.REMOVE FRONT SEAT INNER BELT ASSEMBLY
for Driver Side:
Click hereVehicle Interior>SEAT BELT>FRONT SEAT INNER BELT ASSEMBLY (for 3 Door)>REMOVAL
for Front Passenger Side:
Click hereVehicle Interior>SEAT BELT>FRONT SEAT INNER BELT ASSEMBLY (for 3 Door)>REMOVAL
72495
2.REMOVE FRONT SEAT VERTICAL ADJUSTER HANDLE (for Driver Side)
| *a | Protective Tape |
|
Remove in this Direction |
Operate the front seat vertical adjuster handle and using a screwdriver with its tip wrapped in protective tape, disengage the claw to remove the front seat vertical adjuster handle as shown in the illustration.
72551
3.REMOVE NO.1 RECLINING HINGE COVER
| *a | Protective Tape |
|
Remove in this Direction |
Using a screwdriver with its tip wrapped in protective tape, disengage the claw and guide to remove the No. 1 reclining hinge cover as shown in the illustration.
72526
4.REMOVE RECLINING ADJUSTER RELEASE HANDLE
|
Remove in this Direction |
Disengage the guide to remove the reclining adjuster release handle as shown in the illustration.
71849
5.REMOVE SEAT ADJUSTER COVER CAP (for Driver Side)
| *a | Protective Tape |
|
Remove in this Direction (1) |
|
Remove in this Direction (2) |
Using a screwdriver with its tip wrapped in protective tape, disengage the claws and guides to remove the seat adjuster cover cap as shown in the illustration.
71812D
6.REMOVE FRONT SEAT CUSHION SHIELD
for Driver Side:
Disengage the claws as shown in the illustration.
Disengage the claw and guides as shown in the illustration.
| *a | Protective Tape |
|
Remove in this Direction |
Using a screwdriver with its tip wrapped in protective tape, disengage the claws as shown in the illustration.
|
Remove in this Direction |
Disengage the guide to remove the front seat cushion shield as shown in the illustration.
for Front Passenger Side:
Disengage the claws as shown in the illustration.
Disengage the claws and guides as shown in the illustration.
| *a | Protective Tape |
|
Remove in this Direction |
Using a screwdriver with its tip wrapped in protective tape, disengage the claw as shown in the illustration.
|
Remove in this Direction |
Disengage the guide to remove the front seat cushion shield as shown in the illustration.
71862
7.REMOVE FRONT SEAT INNER CUSHION SHIELD
for Driver Side:
Disengage the claws as shown in the illustration.
|
Remove in this Direction |
Disengage the claws and guide to remove the front seat inner cushion shield as shown in the illustration.
for Front Passenger Side:
Disengage the claws as shown in the illustration.
|
Remove in this Direction |
Disengage the claws and guides to remove the front seat inner cushion shield as shown in the illustration.
8.REMOVE SEPARATE TYPE FRONT SEATBACK ASSEMBLY
for Driver Side:
Disconnect the rubber of the front seatback cover.
| *1 | Front Seat Airbag Assembly |
| *2 | Front Seatback Heater Assembly |
Disengage the claw and clamps to separate the front seat airbag assembly wire harness.
w/ Seat Heater System:
Disconnect the connector and disengage the clamp to separate the front seatback heater assembly wire harness.
Disengage the hooks.
Remove the 4 bolts.
Disengage the guides to remove the separate type front seatback assembly from the front seat adjuster assembly.
| *1 | Front Seat Airbag Assembly |
| *2 | Front Seatback Heater Assembly |
for Front Passenger Side:
Disengage the claw and clamps to separate the front seat airbag assembly wire harness.
w/ Seat Heater System:
Disconnect the connector and disengage the clamp to separate the front seatback heater assembly wire harness.
Disengage the hooks.
Disengaget the casing cap of the seat track control cable assembly.
Disconnect the cable end of the seat track control cable assembly.
Remove the 4 bolts.
Disengage the guides to remove the separate type front seatback assembly from the front seat adjuster assembly.
71739A
9.REMOVE FRONT SEATBACK BEZEL (for Sports Seat Type)
|
Remove in this Direction |
Disengage the claws to remove the front seatback bezel as shown in the illustration.
71930A
10.REMOVE FRONT SEAT HEADREST SUPPORT ASSEMBLY
Disengage the hooks.
Open the 2 fasteners as shown in the illustration.
|
Remove in this Direction |
Disengage the claws to remove the 2 front seat headrest support assemblies as shown in the illustration.
11.REMOVE SEPARATE TYPE FRONT SEATBACK COVER WITH PAD
Remove the separate type front seatback cover with pad from the front seatback frame sub-assembly.
71074S
12.REMOVE SEPARATE TYPE FRONT SEATBACK COVER
for Sports Seat Type:
Using a screwdriver, disengage the claws to remove the separate type front seatback cover from the separate type front seatback pad as shown in the illustration.
| *a | Screwdriver | - | - |
for Sporty Seat Type:
Using a screwdriver, disengage the claws to remove the separate type front seatback cover from the separate type front seatback pad as shown in the illustration.
| *a | Screwdriver | - | - |
87510N
13.REMOVE FRONT SEATBACK HEATER ASSEMBLY (w/ Seat Heater System)
73920A
14.REMOVE FRONT SEAT AIRBAG ASSEMBLY
71054S
15.REMOVE FRONT SEATBACK SPRING SUB-ASSEMBLY
Disengage the claws to separate the 2 front seatback edge protectors from the front seatback frame sub-assembly.
Disengage the guides to remove the front seatback spring sub-assembly from the front seatback frame sub-assembly as shown in the illustration.
71587B
16.REMOVE FRONT SEATBACK EDGE PROTECTOR
Remove the 2 front seatback edge protectors from the front seatback spring sub-assembly.
71759B
17.REMOVE FRONT SEATBACK HOOK
Disengage the claws to remove the 2 front seatback hooks from the front seatback frame sub-assembly.
18.REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD
for Front Passenger Side:
|
Remove in this Direction |
Disengage the claw to remove the occupant detection sensor connector as shown in the illustration.
w/ Seat Heater System:
Disengage the claws and clamps to separate the front seat cushion heater assembly wire harness.
Disengage the hooks to remove the separate type front seat cushion cover with pad.
82667D
19.REMOVE CONNECTOR HOLDER (for Front Passenger Side)
|
Remove in this Direction |
Disengage the claw to remove the connector holder as shown in the illustration.
71072S
20.REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER
for Sports Seat Type:
Using a screwdriver, disengage the claws to remove the separate type front seat cushion cover from the separate type front seat cushion pad as shown in the illustration.
| *a | Screwdriver | - | - |
for Sporty Seat Type:
Using a screwdriver, disengage the claws to remove the separate type front seat cushion cover from the separate type front seat cushion pad as shown in the illustration.
| *a | Screwdriver | - | - |
87510L
21.REMOVE FRONT SEAT CUSHION HEATER ASSEMBLY (w/ Seat Heater System)
71876A
22.REMOVE RECLINING ADJUSTER INSIDE COVER LH
Disengage the claws to remove the reclining adjuster inside cover LH.
71875B
23.REMOVE RECLINING ADJUSTER INSIDE COVER RH
Disengage the claws to remove the reclining adjuster inside cover RH.
71874A
24.REMOVE FRONT SEAT LOWER CUSHION SHIELD LH (for Driver Side)
| *a | Hook |
| *b | Guide |
Disengage the hook.
Disengage the claw and guide to remove the front seat lower cushion shield LH.
71873U
25.REMOVE FRONT SEAT LOWER CUSHION SHIELD RH (for Driver Side)
| *a | Hook |
| *b | Guide |
Disengage the hook.
Disengage the claw and guide to remove the front seat lower cushion shield RH.
7181B
26.REMOVE FRONT SEAT CUSHION WIRE HARNESS HOLDER
Remove the 2 screws.
Disengage the claw to remove the front seat cushion wire harness holder.
82824
27.REMOVE WIRING HARNESS CONNECTOR (w/o Seat Heater System)
Disengage the claw to remove the wiring harness connector.
72210
28.REMOVE SEAT TRACK CONTROL CABLE ASSEMBLY (for Front Passenger Side)
Disconnect the 2 cable ends.
Disengage casing caps and clamps to remove the seat track control cable assembly.
71052A
29.REMOVE FRONT SEAT CUSHION SPRING SUB-ASSEMBLY
Disengage the hooks to remove the front seat cushion spring sub-assembly from the front seat adjuster assembly.
72211
30.REMOVE SEAT TRACK ADJUSTING HANDLE
Disengage the claws to remove the seat track adjusting handle from the front seat adjuster assembly.
72265D
31.REMOVE SEAT TRACK UPPER RAIL COVER
Use the same procedure for both sides.
| *a | Protective Tape |
|
Remove in this Direction |
Using a screwdriver with its tip wrapped in protective tape, disengage the claws to remove the seat track upper rail cover as shown in the illustration.
72125A
32.REMOVE REAR UPPER SEAT TRACK COVER
Use the same procedure for both sides.
| *a | Protective Tape |
|
Remove in this Direction |
Using a screwdriver with its tip wrapped in protective tape, disengage the claws to remove the rear upper seat track cover as shown in the illustration.
72498
33.REMOVE VERTICAL ADJUSTER BRACKET COVER (for Driver Side)
Disengage the claw to remove the vertical adjuster bracket cover.