Home › Brake › PARKING BRAKE › PARKING BRAKE SYSTEM (w/o Electric Parking Brake) › from 2021.11
RM36W0E _54 Brake _089430 PARKING BRAKE _0432119 PARKING BRAKE SYSTEM(w/o Electric Parking Brake) A

PARKING BRAKE  PARKING BRAKE SYSTEM(w/o Electric Parking Brake)  ADJUSTMENT  


PROCEDURE

Hide 1.ADJUST REAR DRUM BRAKE SHOE CLEARANCE (for Rear Drum Brake)

Hide 2.ADJUST PARKING BRAKE SHOE CLEARANCE (for Rear Disc Brake)

a.

Remove the rear wheels.

Click hereGeneral>MAINTENANCE>TIRE AND WHEEL>REMOVAL


b.

Temporarily install the hub nuts.

HINT:

Secure the rear disc with the hub nuts.



c.

Remove the parking brake shoe adjusting hole plug.


d.
C445256C01
0,0 0,0 false
V100135

Expand
V100136

Contract


Turn the parking brake shoe adjuster and expand the shoes until the rear disc locks.


e.

Turn and contract the parking brake shoe adjuster until the rear disc can rotate smoothly.

Standard:

Returns 8 notches



f.

Check whether the parking brake drags or not.


g.

Install the parking brake shoe adjusting hole plug.


h.

Remove the hub nuts.


i.

Install the rear wheels.

Click hereGeneral>MAINTENANCE>TIRE AND WHEEL>INSTALLATION


Hide 3.INSPECT PARKING BRAKE LEVER TRAVEL

a.

Pull the parking brake lever to fully engage the parking brake.


b.

Release the parking brake lever to disengage the parking brake.


c.

Slowly pull the parking brake lever using the specified force, and count the number of clicks.

Parking Brake Lever Travel at 200 N (20 kgf, 45.0 lbf):

5 to 8 clicks


If the parking brake lever travel is not as specified, adjust the parking brake lever travel.


Hide 4.ADJUST PARKING BRAKE LEVER TRAVEL

a.

for 5 Door TMC Made:

i.

Remove the upper No. 1 console support bracket.

Click hereVehicle Interior>INTERIOR PANELS / TRIM>REAR CONSOLE BOX (for 5 Door)>REMOVAL



b.

for 5 Door TMMF, TMMCZ Made HV Model:

i.

Remove the upper No. 1 console support bracket.

Click hereVehicle Interior>INTERIOR PANELS / TRIM>REAR CONSOLE BOX (for 5 Door)>REMOVAL



c.

for 5 Door TMMF, TMMCZ Made Gasoline Model:

i.

Remove the console rear end panel sub-assembly.

Click hereVehicle Interior>INTERIOR PANELS / TRIM>REAR CONSOLE BOX (for 5 Door)>REMOVAL



d.

for 3 Door:

i.

Remove the console rear end panel sub-assembly.

Click hereVehicle Interior>INTERIOR PANELS / TRIM>REAR CONSOLE BOX (for 3 Door)>REMOVAL



e.

Completely release the parking brake lever.


f.
C430601C03
2.99,1.021 2.667,1.208 true 3.01,0.917 3.24,1.115 0.229,0.198 10 true *1
*1 No. 1 Wire Adjusting Nut


Turn the No. 1 wire adjusting nut until the parking brake lever travel is corrected to within the specified range.

Parking brake lever travel at 200 N (20 kgf, 45.0 lbf):

5 to 8 clicks


NOTICE:

If the No. 1 wire adjusting nut has been removed from the rod, replace it with a new one.



g.

Operate the parking brake lever 3 to 4 times, and check the parking brake lever travel.


h.

Check whether the parking brake drags or not.


i.

for 5 Door TMC Made:

i.

Install the upper No. 1 console support bracket.

Click hereVehicle Interior>INTERIOR PANELS / TRIM>REAR CONSOLE BOX (for 5 Door)>INSTALLATION



j.

for 5 Door TMMF, TMMCZ Made HV Model:

i.

Install the upper No. 1 console support bracket.

Click hereVehicle Interior>INTERIOR PANELS / TRIM>REAR CONSOLE BOX (for 5 Door)>INSTALLATION



k.

for 5 Door TMMF, TMMCZ Made Gasoline Model:



l.

for 3 Door:

i.

Install the console rear end panel sub-assembly.

Click hereVehicle Interior>INTERIOR PANELS / TRIM>REAR CONSOLE BOX (for 3 Door)>INSTALLATION



Hide 5.INSPECT PARKING BRAKE WARNING LIGHT

a.

When operating the parking brake lever, check that the parking brake warning light illuminates.

Standard:

Parking brake warning light always illuminates at the first click.