P0561 System Voltage Unstable
Diagnostic trouble codes · Vehicles built from Aug 2005
DESCRIPTION
When the ignition switch is turned on (IG), the battery voltage is applied to terminal +B of the ECM.| DTC No. |
DTC Detection Condition |
Trouble Area |
| P0561 |
Even though 6 V or more supplied to ECM, ECM recognizes voltage as 2.5 V or less (3 trip detection logic) |
ECM |
- HINT:
- DTC P0561 is detected when the ignition switch is turned on (IG).
INSPECTION PROCEDURE
| 1. REPLACE ECM |
- NOTICE:
- Perform electronic throttle learning after replacing the ECM (Click here).
| NEXT | ||
| ||
