2005-2008 Yaris · Service Manual TRANSMISSION

DTC CHECK / CLEAR

Troubleshooting · Vehicles built from Nov 2005

HINT:
DTCs which are stored in the transmission control ECU can be displayed on the intelligent tester or generic OBD scan tool.


CHECK DTC (Using intelligent tester)

  1. A107926E01
    Connect the intelligent tester to the DLC3.

  2. Turn the ignition switch on (IG) and turn the intelligent tester ON.

  3. Select the following menu items: Powertrain / Multi-Mode M/T.

  4. Check DTCs and freeze frame data, and write them down.

  5. See DTC chart to confirm the details of the DTCs (Click here).

    HINT:
    Intelligent testers can display current DTC data, pending DTC data and historical DTC data. Touch the [Current], [Pending] or [History] button in the DTC display screen.
    [Current]: Displays the current DTC data
    [Pending]: Displays the pending DTC data
    [History]: Displays the historical DTC data (past codes)


FREEZE FRAME DATA
  1. Connect the intelligent tester to the DLC3.

  2. Turn the ignition switch on (IG) and turn the intelligent tester ON.

  3. Read DTCs by selecting the following menu items: Powertrain / Multi-Mode M/T / DTC.

  4. Select the parameter(s) to check the freeze frame data.

  5. Note down the DTC(s) and freeze frame data.

    HINT:
    1. A "!" displayed in red to the left of DTC data indicates that freeze frame data has been recorded for that data.
    2. For help using the intelligent tester, refer to the instruction manual.


CLEAR DTCs AND FREEZE FRAME DATA (Using intelligent tester)
  1. Connect the intelligent tester to the DLC3.

  2. Turn the ignition switch on (IG) and turn the intelligent tester ON.

  3. Select the following menu items: Powertrain / Multi-Mode M/T / DTC / Clear.

  4. Erase DTCs and freeze frame data by pressing the YES button on the tester.

    HINT:
    For help using the intelligent tester, refer to the instruction manual.

← DIAGNOSIS SYSTEM (from Nov 2005)FAIL-SAFE CHART (from Nov 2005) →