2005-2008 Yaris · Service Manual TRANSMISSION

REMOVAL

Removal / installation · Vehicles built from Nov 2005


1. REMOVE BRAKE BOOSTER ASSEMBLY
(Click here)

2. REMOVE INSTRUMENT PANEL SUB-ASSEMBLY UPPER
(Click here)

3. REMOVE CLUTCH RESERVOIR TUBE
  1. Loosen the clip and remove the clutch reservoir tube from the clutch master cylinder assembly.

    HINT:
    Use a container to collect the fluid.


4. DISCONNECT CLUTCH MASTER CYLINDER TO FLEXIBLE HOSE TUBE

C115313
  1. Using SST, disconnect the flexible hose tube.

    SST
    09023-00101  

    HINT:
    Use a container to collect the fluid.


5. REMOVE INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY NO.1

  1. B114572
    Remove the 2 screws.

  1. Disengage the 3 claws and remove the instrument panel under cover.


6. REMOVE CLUTCH MASTER CYLINDER ASSEMBLY

C115307
  1. Remove the 2 nuts and the clutch master cylinder.


7. REMOVE CLUTCH PEDAL SUPPORT SUB-ASSEMBLY
  1. Disconnect the wire harness clamp.

  1. Disconnect the clutch start switch connector.

  1. C115316
    Remove the bolt and clutch pedal support.


8. REMOVE CLUTCH START SWITCH ASSEMBLY

C115315
  1. Remove the nut and clutch start switch.


9. REMOVE CLUTCH PEDAL STOPPER BOLT

C115317
  1. Loosen the lock nut and remove the clutch pedal stopper bolt.


10. REMOVE CLUTCH PEDAL SPRING

11. REMOVE CLUTCH PEDAL SUB-ASSEMBLY

C115308
  1. Remove the bolt and the nut.

  1. Remove the clutch pedal from the clutch pedal support.


12. REMOVE CLUTCH PEDAL PAD

13. REMOVE CLUTCH PEDAL BUSH

C115309
  1. Remove the 2 bushes from the clutch pedal.

  1. Remove the collar from the clutch pedal.


14. REMOVE CLUTCH PEDAL NO.1 CUSHION

C115318
  1. Remove the clutch pedal No. 1 cushion from the clutch pedal.

← ON-VEHICLE INSPECTION (from Nov 2005)INSTALLATION (from Nov 2005) →