2005-2008 Yaris · Service Manual BRAKE

C1203/53 ECM Communication Circuit Malfunction

Diagnostic trouble codes · Vehicles built from Aug 2005

DESCRIPTION

The circuit is used to send TRC and VSC control information from the skid control ECU to the ECM, and engine control information from the ECM to the skid control ECU.
DTC No.
DTC Detecting Conditions
Trouble Area
C1203/53
Information relating to engine, drive source or destination stored in ECM does not match information stored in skid control ECU.
ECM

INSPECTION PROCEDURE


1. RECONFIRM DTC
  1. Clear the DTC (Click here).

  1. Start the engine.

  1. Check if the same DTC is output (Click here).

    Result
    Proceed to
    DTC output
    A
    DTC not output
    B



B
END
A


2. REPLACE ECM

NEXT

END


← C1201/51 Engine Control System Malfunction (from Aug 2005)C1210/36 Zero Point Calibration of Yaw Rate Sensor Undone (+ C1336/39) (from Aug 2005) →