B2325 LIN Communication Bus Malfunction
Diagnostic trouble codes · Vehicles built from Aug 2005
DESCRIPTION
DTC B2325 is output when the communication between the power window regulator motor (driver side) and main body ECU stops for more than 10 seconds.WIRING DIAGRAM
Refer to DTC B2321 on page Click here.INSPECTION PROCEDURE
| 1. RECONFIRM OUTPUT DTC |
Connect the intelligent tester to the DLC3.
Turn the ignition switch on (IG) and turn the tester ON.
Clear the DTCs.
Check whether DTC B2325 recurs 10 seconds or more after the ignition switch is turned on (IG).
- Result:
Display (DTC output)
Proceed To
B2325
A
No DTC output
B
|
|
||||
| A | ||
| ||
