PROBLEM SYMPTOMS TABLE
Troubleshooting
Proceed to the reference page shown in the table below for each malfunction symptom and troubleshoot each circuit.
| Symptom |
Suspected area |
See page |
| The wireless door lock control system does not operate. |
1. Perform the operation check |
Click here
|
| 2. Check if the MULTIPLEX communication DTC is output |
Click here
|
|
| 3. Door control transmitter |
Click here
|
|
| 4. Door courtesy light switch circuit |
Click here
|
|
| 5. Luggage compartment door courtesy light switch |
Click here
|
|
| 6. Power source circuit |
Click here
|
|
| 7. Replace door control receiver |
- |
|
| 8. Replace certification ECU |
- |
|
| 9. If the symptom still occurs after the above areas have been inspected and proved to be normal, replace the main body ECU RH (cowl side J/B RH) |
- |
|
| The panic alarm function only does not operate.* |
1. Perform the operation check |
Click here
|
| 2. Door control transmitter |
Click here
|
|
| 3. If the symptom still occurs after the above area has been inspected and proved to be normal, replace the main body ECU RH (cowl side J/B RH) |
- |
|
| The panic alarm function does not operate (Vehicle horn).* |
1. Perform the operation check |
Click here
|
| 2. Horn circuit |
Click here
|
|
| 3. If the symptom still occurs after the above areas have been inspected and proved to be normal, replace the main body ECU RH (cowl side J/B H) |
- |
|
| The panic alarm function does not operate (Security horn).* |
1. Perform the operation check |
Click here
|
| 2. Security horn circuit |
Click here
|
|
| 3. If the symptom still occurs after the above areas have been inspected and proved to be normal, replace the main body ECU RH (cowl side J/B RH) |
- |
|
| The panic alarm function does not operate (Hazard warning light).* |
1. Perform the operation check |
Click here
|
| 2. Wire harness |
- |
|
| 3. Turn signal flasher |
Click here
|
|
| 4. If the symptom still occurs after the above areas have been inspected and proved to be normal, replace the main body ECU RH (cowl side J/B RH) |
- |
|
| The panic alarm function does not operate (Headlight or taillight).* |
1. Perform the operation check |
Click here
|
| 2. Lighting system |
Click here
|
|
| 3. If the symptom still occurs after the above areas have been inspected and proved to be normal, replace the main body ECU RH (cowl side J/B RH) |
- |
|
| The automatic lock function does not operate normally. |
1. Perform the operation check |
Click here
|
| 2. Door courtesy light switch circuit |
Click here
|
|
| 3. If the symptom still occurs after the above areas have been inspected and proved to be normal, replace the main body ECU RH (cowl side J/B RH) |
- |
|
| The door ajar warning function only does not operate. |
1. Perform the operation check |
Click here
|
| 2. Door courtesy switch circuit |
Click here
|
|
| 3. If the symptom still occurs after the above areas have been inspected and proved to be normal, replace the main body ECU RH (cowl side J/B RH) |
- |
|
| The illuminated entry function only does not operate. |
1. Perform the operation check |
Click here
|
| 2. Lighting system |
Click here
|
|
| 3. If the symptom still occurs after the above area has been inspected and proved to be normal, replace the main body ECU RH (cowl side J/B RH) |
- |
|
| The answer back function does not operate (Wireless door lock buzzer).* |
1. Perform the operation check |
Click here
|
| 2. Wireless door lock buzzer circuit* |
Click here
|
|
| 3. If the symptom still occurs after the above areas have been inspected and proved to be normal, replace the main body ECU RH (cowl side J/B RH) |
- |
|
| The answer back function does not operate (Hazard warning light). |
1. Perform the operation check |
Click here
|
| 2. Wire harness |
- |
|
| 3. Turn signal flasher |
Click here
|
|
| 4. If the symptom still occurs after the above areas have been inspected and proved to be normal, replace the main body ECU RH (cowl side J/B RH) |
- |
- HINT:
- *: Australia, New Zealand