[ Model - ECLIPSE CROSS / Year - 2018 ]
PRINT
PRINT (GROUP)
| caution | On troubleshooting, if the ignition switch is turned ON while disconnecting connector(s), diagnosis code(s) associated with other system may be set. On completion, confirm all systems for diagnosis code(s). If diagnosis code(s) are set, erase them all. |
| Diagnosis code No. | Diagnostic item | Reference page |
| B1E19 | Rear Fog Lamp(LH/RH) Open Load or Blown Error |  |
| B1E1A | Rear Fog Lamp(LH/RH) Overload or Short Circuit | |
| B1E1B | Rear Fog Lamp(LH/RH) deactivated (FET failure) | |
| B1E2C | Multichannel Driver CH8 Defective (Open/Short) | |