Engine Basic Inspection
Precautions: General safety (00)
This check is very important for troubleshooting when ECM has detected no DTC and no abnormality has been found in Visual Inspection:M16A.
Follow the flow carefully.
| Step | Action | Yes | No |
|---|---|---|---|
| 1 |
Was “Engine and Emission Control System Check” performed?
|
Go to Step 2.
|
|
| 2 |
Check battery voltage
Is it 12 V or more?
|
Go to Step 3.
|
Charge or replace battery.
|
| 3 |
Is engine cranked?
|
Go to Step 4.
|
|
| 4 |
Does engine start?
|
Go to Step 5.
|
Go to Step 7.
|
| 5 |
Check idle speed
1)Check engine idle speed.
Is check result OK?
|
Go to Step 6.
|
|
| 6 |
Check ignition system
1)Check ignition system.
Is check result OK?
|
Repair or replace defective parts.
|
|
| 7 |
Check immobilizer system
1)Check immobilizer control system.
•Ignition switch model:
•Keyless push start model: Is check result OK?
|
Go to Step 8.
|
Immobilizer control system malfunction.
|
| 8 |
Check fuel supply
1)Check fuel supply.
Is check result OK?
|
Go to Step 9.
|
Repair or replace defective parts.
|
| 9 |
Check fuel injector circuit
1)Check fuel injector circuit.
Is check result OK?
|