Visual Inspection
Precautions: General safety (00)
Visually check the following parts and systems.
| Inspection item | Referring section |
|---|---|
|
•Engine oil – Level, leakage
|
Engine Oil and Filter Change |
|
•Engine coolant – Level, leakage
|
|
|
•Fuel – Level, leakage
|
Fuel Leakage Check Procedure:M16A |
|
•ATF – Level, leakage
|
ATF Level Check |
|
•Air cleaner filter – Dirt, clogging
|
Air Cleaner Filter Inspection and Cleaning:M16A |
|
•Battery – Corrosion of terminal
|
Battery Inspection:M16A |
|
•Accessory drive belt – Tension, damage
|
Water Pump / Generator Drive Belt Tension Inspection and Adjustment:M16A |
|
•Throttle valve – Operating sound
|
— |
|
•Vacuum hoses of air intake system – Disconnection, looseness, deterioration, bend
|
— |
|
•Connectors of electric wire harness – Disconnection, friction, pinch
|
— |
|
•Fuses – Blown
|
— |
|
•Parts – Installation, deformation
|
— |
|
•Bolts and nuts – Looseness
|
— |
Additionally check the following items at engine start, if possible.
| Inspection item | Referring section |
|---|---|
|
•MIL – Operation
|
MIL Check:M16A |
|
•Charging light – Operation
|
Generator Symptom Diagnosis:M16A |
|
•Engine oil pressure light – Operation
|
Oil Pressure Switch On-Vehicle Inspection:M16A |
|
•Engine coolant temperature meter – Operation
|
ECT Sensor Inspection:M16A |
|
•
|
Fuel Level Sensor Inspection:M16A |
|
•Tachometer – Operation
|
Section 9C |
|
•Exhaust system – Leakage of exhaust gas, noise
|
Exhaust System Check:M16A |
|
•Abnormal air being inhaled at air intake system
|
— |
|
•Other parts that can be checked visually
|
— |