DTC P2228 / P2229
Precautions: General safety (00)
DTC Detecting Condition and Trouble Area
| DTC detecting condition | Trouble area |
|---|---|
|
P2228: Barometric Pressure Sensor “A” Circuit Low Barometric pressure sensor signal voltage is lower than specified value for specified time. (1 D/C detection logic) |
Barometric pressure sensor in ECM |
|
P2229: Barometric Pressure Sensor “A” Circuit High Barometric pressure sensor signal voltage is higher than specified value for specified time. (1 D/C detection logic) |
DTC Confirmation Procedure
1)Set ignition “ON” for 1 min.
DTC Troubleshooting
| Step | Action | Yes | No |
|---|---|---|---|
| 1 |
Was “Engine and Emission Control System Check” performed?
|
Go to Step 2.
|
|
| 2 |
ECM power supply and ground circuit check
1)Check ECM power supply and ground circuits.
Is check result OK?
|
Replace ECM and recheck DTC.
|
Repair ECM power supply and ground circuits.
|