Description of ECM Registration

The following vehicle information is registered in ECM.

•Injector calibration code
•Vehicle variant data (additional heater, cruise control, A/C)
•ECM substitution data (oil life, soot mass, mean value, number of time)
•Differential pressure sensor data
•MAF sensor data
•Engine oil parameter
•EGR-1 data
•EGR-2 data
•DPF^® driving pattern parameter
•A/F sensor dew point
•Fuel injection system part parameter
•A/F sensor parameter
•DPF^® regeneration parameter
•DPF^® condition parameter
•Driven distance with fuel filter warning light ON
•Rail pressure sensor data
•Catalyst condition parameter
•Immobilizer ID code

If any one of the following parts is replaced, register / initialize the necessary information in ECM as table below.

Part	Registered/ Initialized data or service menu	Reference
ECM	•Injector calibration code •Vehicle variant data •ECM substitution data •Engine oil parameter •DPF^® driving pattern parameter •EGR-1 data •EGR-2 data •A/F sensor dew point •Immobilizer ID code •Regeneration (DPF^®) •Turbocharger test	Go to Registration for ECM Replacement:D16AA.
Fuel injector(s)	•Injector calibration code •Fuel injection system part parameter •DPF^® regeneration parameter	•Go to Injector Calibration Code Registration:D16AA. •Go to Fuel Injection System Part Parameter Initialization:D16AA. •Go to DPF® Regeneration Parameter Initialization:D16AA.
Engine oil	Engine oil parameter	Go to Engine Oil and Filter Change:D16AA.
DPF^® differential pressure sensor	Differential pressure sensor data	Go to Differential Pressure Sensor Data Initialization:D16AA.
DPF^®	•DPF^® condition parameter •Regeneration (DPF^®)	Go to DPF® Condition Parameter Initialization:D16AA.
A/F sensor-1	•A/F sensor parameter •A/F sensor dew point	•Go to A/F Sensor Parameter Initialization:D16AA. •Go to A/F Sensor Dew Point Initialization:D16AA.
MAF sensor	•MAF sensor data •Fuel injection system part parameter	•Go to MAF Sensor Data Initialization:D16AA. •Go to Fuel Injection System Part Parameter Initialization:D16AA.
•Common rail •Fuel pressure sensor	•Fuel injection system part parameter •Rail pressure sensor data	•Go to Fuel Injection System Part Parameter Initialization:D16AA. •Go to Rail Pressure Sensor Data Initialization:D16AA.
Ignition switch model: BCM Keyless push start model: Keyless control module	Immobilizer ID code	Ignition switch model: Go to ECM Registration:Ignition Switch Model. Keyless push start model: Go to ECM Registration:Keyless Push Start Model.
EGR-1 valve	•EGR-1 data •EGR-1 test	•Go to EGR-1 Data Initialization:D16AA. •Go to EGR-1 Test:D16AA.
EGR-2 valve	•EGR-2 data •EGR-2 test	•Go to EGR-2 Data Initialization:D16AA. •Go to EGR-2 Test:D16AA.
Fuel filter detection sensor	Reset driven distance with fuel filter warning light ON	Go to Reset Driven Distance with Fuel Filter Warning Light ON:D16AA.
•Turbocharger •Turbocharger position sensor	Turbocharger test	Go to Turbocharger Test:D16AA.
Inlet throttle body	Throttle valve test	Go to Throttle Valve Test:D16AA.