Tightening Torque Specifications
Precautions: General safety (00)
NOTE:
For fastener(s) with * (asterisk) below, refer to the specified procedure in “Repair Instructions”.
| Fastening part | Tightening torque | Note | ||
|---|---|---|---|---|
| N·m | kgf-m | lbf-ft | ||
| Engine oil drain plug | 35 | 3.6 | 26.0 |
 |
| Oil filter stand | 22 | 2.2 | 16.5 |
|
| Oil filter | 14 | 1.4 | 10.5 |
|
| Oil pressure switch | 13 | 1.3 | 9.5 |
|
| Oil pressure switch cover bolt | 11 | 1.1 | 8.5 |
|
| Oil pan baffle plate bolt | 11 | 1.1 | 8.5 |
|
| Oil pump strainer bolt | 11 | 1.1 | 8.5 |
|
| Oil pan bolt (M6)* | 11 | 1.1 | 8.5 |
|
| Oil pan nut* | 11 | 1.1 | 8.5 |
|
| Oil pan bolt (M10)* | 55 | 5.6 | 40.5 |
|
| Transaxle bolt | 55 | 5.6 | 40.5 |
|
| Clutch housing lower plate bolt | 11 | 1.1 | 8.5 |
|
| Oil pump rotor plate bolt | 11 | 1.1 | 8.5 |
|
Reference:
For the tightening torques of fasteners not specified in this page, refer to: