Brake warning light remains ON (for more than 2 sec) after starting engine
Precautions: Precautions for Brake Service · Precautions for Brakes · General safety (00)
| Condition | Possible Cause | Action |
|---|---|---|
|
Brake warning light remains ON (for more than 2 sec) after starting engine
|
ESP® control module connector is not connected properly
|
Connect ESP® control module connector again.
|
|
Parking brake is applied
|
Release parking brake and check that warning light goes off.
|
|
|
Insufficient amount of brake fluid
|
Check brake fluid level.
|
|
|
Faulty parking brake switch and/or brake fluid level switch
|
Check parking brake switch and/or brake fluid level switch.
•Parking brake switch:
•Brake fluid level switch: |
|
|
Malfunctioning CAN communication system
|
Check CAN communication system.
•M16A model:
•K14C model: •D16AA model: |
|
|
Faulty combination meter
|
Replace combination meter.
|
|
|
Faulty ESP® control module
|
Replace ESP® control module.
|