DTC Table

Precautions: Precautions for Diagnosing Trouble · Precautions for Replacing Ignition Key (Ignition Switch Model) · Precautions for Transmitter Disposal (Ignition Switch Model) · Precautions for Replacing Keyless Entry Control Module (Ignition Switch Model) · Precautions for Body, Cab and Accessories · General safety (00)

NOTE:

•*1: Theft deterrent light blinks.
•*2: Immobilizer indicator light lights up or blinks.

DTC	DTC name	DTC detecting condition	Warning
B1120	Keyless Start Control Module Internal Defect	Keyless entry control module internal failure.	Lights up *2
B1122	Backup Power Supply Malfunction	Backup power supply circuit voltage from “BCM” fuse is lower than specified value.	Lights up *1
B1123	Backup Power Supply Malfunction	Backup power supply circuit voltage from “DOME” fuse is lower than specified value.	Lights up *1
B1167	Immobilizer Information Mismatched	Refer to DTC Table:Ignition Switch Model.
B1168	Password Mismatched
B1169	Registration Failure
B1170	EEPROM Access Error	Keyless entry control module internal failure. (EEPROM error)	Lights up *2
B1173	Transponder Unregistered	Refer to DTC Table:Ignition Switch Model.
B1175	Immobilizer Information Unregistered
B1176	Specification Information Unregistered
B1188	Transponder Communication Error
B1189	Immobilizer Antenna Communication Error
B1190	Engine Switch Malfunction
B1461	Vehicle Speed Signal Inconsistency	Vehicle speed is not input by CAN communication.	Off
U0073	Control Module Communication Bus Off	Keyless entry control module fails to transmit and receive data via CAN for specified time continuously.	Off
U0100	Lost Communication With ECM	Receiving error of data from ECM via CAN for specified time continuously	Off
U0140	Lost Communication With Body Control Module	Receiving error of data from BCM via CAN for specified time continuously.	Off
U0155	Lost Communication With Instrument Panel Cluster (IPC) Control Module	Receiving error of data from combination meter via CAN for specified time continuously.	Off