DTC Table
Precautions: Precautions for Diagnosing Trouble · Precautions for Adaptive Cruise Control System · Precautions for Replacing RBS Control Module · General safety (00)
RBS Control Module
Refer to DTC Table.
ECM
| DTC | DTC name | DTC detecting condition | Adaptive cruise control warning light |
|---|---|---|---|
| P0504 | Brake Switch “A”/“B” Correlation | Refer to “DTC Table” in Section 1A.
•M16A model:
 •K14C model: •D16AA model: |
Lights up |
| P0575
|
Cruise Control Input Circuit | This DTC is detected if any one of the following conditions is met.
•Signal voltage of cruise control switch signal circuit is higher than specified voltage for specified time continuously.
•ON signals of any or all of following switches of adaptive cruise control system are detected for longer than specified time.
—CRUISE (main) switch
—LIMIT switch —CANCEL switch —RES/+ switch —SET/– switch —Distance switch |
Lights up |
| P0649
|
Speed Control Lamp Control Circuit | “CRUISE / SET / LIMIT indicator lighting signal” from combination meter remains unchanged even if ECM transmits request to turn on or turn off “CRUISE / SET / LIMIT indicator light control signal” to combination meter through CAN communication. | Lights up |