DTC B1122
Precautions: Precautions for Diagnosing Trouble · Precautions for Replacing Remote Controller · Precautions for Remote Controller Disposal · Precautions for Replacing Keyless Start Control Module · Precautions for Control Systems · General safety (00)
DTC Detecting Condition and Trouble Area
| DTC detecting condition | Trouble area |
|---|---|
|
B1122: Backup Power Supply Malfunction Backup power supply circuit voltage from “BCM” fuse is lower than specified value. |
•“BCM” fuse
•Keyless start control module |
DTC Confirmation Procedure
1)Set ignition “ON”.
DTC Troubleshooting
| Step | Action | Yes | No |
|---|---|---|---|
| 1 |
Fuse check
1)Check that ignition is “OFF”.
2)Check “BCM” fuse.
Is check result OK?
|
Replace keyless start control module and recheck DTC.
|
Replace “BCM” fuse and go to Step 2.
|
| 2 |
DTC check
1)Set ignition “ON”.
2)Check DTC.
Is DTC B1122 still detected?
|
Replace “BCM” fuse and keyless start control module, and recheck DTC.
|
End.
|