Section 6 - Steering
Section 6 - Steering
Section 6B - Steering Wheel and Column
NOTE:
For fastener(s) with * (asterisk) below, refer to the specified procedure in “Repair Instructions”.
| Fastening part | Tightening torque | Note | ||
|---|---|---|---|---|
| N·m | kgf-m | lbf-ft | ||
| Steering shaft nut | 33 | 3.4 | 24.5 |
 |
| Steering column lower nut | 14 | 1.4 | 10.5 |
|
| Steering column upper nut | 14 | 1.4 | 10.5 |
|
| Harness bracket bolt | 5.5 | 0.56 | 4.0 |
|
| Steering lower shaft joint bolt (pinion shaft side) | 35 | 3.6 | 26.0 |
|
| Steering lower shaft joint bolt (steering column side) | 35 | 3.6 | 26.0 |
|
| Tie-rod end nut | 45 | 4.6 | 33.5 |
|
| Tie-rod end lock nut | 45 | 4.6 | 33.5 |
|
| Steering gear case bolt | 80 | 8.2 | 59.0 |
|
| Tie-rod | 88 | 9.0 | 65.0 |
|
| Rack damper screw* | Tighten 25 N·m (2.5 kgf-m, 18.5 lbf-ft) → 0 N·m (0 kgf-m, 0 lbf-ft) → 8 N·m (0.82 kgf-m, 6.0 lbf-ft) → –9° |
|
||
| Rack damper screw lock nut | 55 | 5.6 | 40.5 |
|
Reference:
For the tightening torques of fasteners not specified in this page, refer to: