Home › General › MAINTENANCE › ENGINE
RM1440E _V1 General _056123 MAINTENANCE _0273857 ENGINE N

MAINTENANCE  ENGINE  GENERAL MAINTENANCE  


CAUTION / NOTICE / HINT

HINT:

Work in a well-lighted area. Turn the front wheels fully to the right or left before beginning the inspection.


PROCEDURE

Hide 1.INSPECT DRIVE BELT

Hide 2.REPLACE ENGINE OIL AND OIL FILTER

a.

Replace the engine oil and oil filter (See page Engine / Hybrid System>1GR-FE LUBRICATION>OIL AND OIL FILTER>REPLACEMENT).


Hide 3.INSPECT ENGINE COOLANT

Hide 4.REPLACE ENGINE COOLANT

a.

Replace the engine coolant (See page Engine / Hybrid System>1GR-FE COOLING>COOLANT>REPLACEMENT).


Hide 5.INSPECT EXHAUST PIPES AND MOUNTINGS

a.

Visually check the pipes, hangers and connections for severe corrosion, leaks or damage.


Hide 6.REPLACE SPARK PLUGS

Hide 7.INSPECT AIR CLEANER FILTER

a.

Remove the air filter.


b.

Check that the air cleaner is not excessively dirty.


c.

If the air cleaner is excessively dirty, replace the air cleaner filter element.


d.
A156094

If cleaning the air cleaner filter element, blow compressed air as shown in the illustration to clean it.


e.

Reinstall the air filter.


Hide 8.INSPECT FUEL LINES, FUEL LINE CONNECTIONS, FUEL TANK VAPOR VENT SYSTEM HOSES AND FUEL TANK BAND

a.

Visually check the fuel lines and hoses for cracks, leakage, loose connections and deformation. Also, visually check the tank bands for looseness.


Hide 9.INSPECT FUEL TANK CAP GASKET

Hide 10.INSPECT BATTERY ELECTROLYTE LEVEL

Hide 11.REPLACE FUEL FILTER

a.

Hide 12.INSPECT CHARCOAL CANISTER

a.

Inspect the charcoal canister (See page Engine / Hybrid System>1GR-FE EMISSION CONTROL>CANISTER>INSPECTION).