1.REMOVE ENGINE WIRE
2.DISCONNECT HEATER WATER HOSE ASSEMBLY
Disconnect the 2 hoses and remove the heater water hose assembly.
19500
3.REMOVE IGNITION COIL ASSEMBLY
Remove the 6 bolts and 6 ignition coils.
11181A
4.REMOVE REAR CYLINDER HEAD COVER
5.REMOVE FUEL PIPE SUB-ASSEMBLY
Disconnect the 2 fuel pipes (See page Engine / Hybrid System>1GR-FE FUEL>FUEL SYSTEM>PRECAUTION).
Remove the 2 bolts and fuel pipe.
23807
6.REMOVE FUEL DELIVERY PIPE SUB-ASSEMBLY
23250
7.REMOVE FUEL INJECTOR ASSEMBLY
17111
8.REMOVE INTAKE MANIFOLD
16206
9.REMOVE WATER BY-PASS PIPE SUB-ASSEMBLY
16603
10.REMOVE NO. 1 IDLER PULLEY SUB-ASSEMBLY
16604
11.REMOVE NO. 2 IDLER PULLEY SUB-ASSEMBLY
16620
12.REMOVE V-RIBBED BELT TENSIONER ASSEMBLY
11452
13.REMOVE ENGINE OIL LEVEL DIPSTICK GUIDE
12315
14.REMOVE FRONT NO. 1 ENGINE MOUNTING BRACKET LH
Remove the 3 bolts and front No. 1 engine mounting bracket LH.
12311
15.REMOVE FRONT NO. 1 ENGINE MOUNTING BRACKET RH
Remove the 4 bolts and front No. 1 engine mounting bracket RH.