Home › Engine / Hybrid System › 1GR-FE COOLING › WATER PUMP › 2009.08–2013.08
RM1440E _51 Engine / Hybrid System _056129 1GR-FE COOLING _0273911 WATER PUMP A

1GR-FE COOLING  WATER PUMP  REMOVAL  


PROCEDURE

Hide 51405A 3.REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY

Hide 16571C 6.REMOVE NO. 1 RADIATOR HOSE

Hide 16572D 7.REMOVE NO. 2 RADIATOR HOSE

Hide 16470 8.REMOVE RADIATOR RESERVOIR

Hide 32907C 9.DISCONNECT OIL COOLER TUBE

Hide 16323 11.REMOVE WATER INLET HOUSING

a.

Disconnect the throttle body connector.


b.
A223011

Disconnect the 5 water by-pass hoses.


c.

Disconnect the oil cooler hose.


d.

Disconnect the No. 2 oil cooler hose.


e.
A223012

Remove the 5 bolts and water inlet.


f.

Remove the O-ring from the water outlet pipe.


g.

Remove the gasket from the water pump.


Hide 16604 12.REMOVE NO. 2 IDLER PULLEY SUB-ASSEMBLY

A223006

a.

for Separate Type:

Remove the 2 bolts, 2 idler pulley cover plates, 2 No. 2 idler pulleys and 2 No. 2 idler pulley cover plates.


b.

for Integrated Type:

Remove the 2 bolts and 2 No. 2 idler pulleys.


Hide 44320 13.DISCONNECT VANE PUMP ASSEMBLY

a.
A223016

Disconnect the 2 connectors.


b.

Detach the 2 wire harness clamps.


c.
A223015

Remove the 2 bolts and disconnect the vane pump.


Hide 27020 14.REMOVE GENERATOR ASSEMBLY

a.

Remove the generator assembly (See page Power Source / Network>1GR-FE BATTERY / CHARGING>GENERATOR>REMOVAL).


Hide 88320 15.REMOVE COOLER COMPRESSOR ASSEMBLY

a.

Remove the cooler compressor assembly (See page Vehicle Interior>HEATING / AIR CONDITIONING>COMPRESSOR>REMOVAL).


Hide 16620 16.REMOVE V-RIBBED BELT TENSIONER ASSEMBLY

Hide 16100 17.REMOVE WATER PUMP ASSEMBLY

a.
A223007

Remove the 17 bolts, water pump and gasket.