Home › Engine / Hybrid System › 1GR-FE LUBRICATION › ENGINE OIL COOLER › from 2013.08
RM1440E _51 Engine / Hybrid System _056130 1GR-FE LUBRICATION _0273917 ENGINE OIL COOLER A

1GR-FE LUBRICATION  ENGINE OIL COOLER  INSTALLATION  


PROCEDURE

Hide 15710 1.INSTALL OIL COOLER ASSEMBLY

a.

Install a new seal washer to the oil cooler union bolt.


b.

Install the oil cooler assembly with the oil cooler union bolt and nut.

Torque:
for Union Bolt : 68 N*m (693 kgf*cm, 50 ft.*lbf)
for Nut : 10 N*m (102 kgf*cm, 7 ft.*lbf)


c.
A224741E05
2.896,1.177 3.073,1.344 0.177,0.167 10 true *a 2.542,1.51 2.719,1.677 0.177,0.167 10 true *b

Install the 2 water by-pass hoses and slide the 2 hose clamps to secure them.

Text in Illustration
*a Upward
*b Rearward

HINT:

The direction of the hose clamp is indicated in the illustration.



Hide 16206 3.CONNECT WATER BY-PASS PIPE SUB-ASSEMBLY

a.
A224742E07
2.917,1.156 3.083,1.323 0.167,0.167 10 true *a 2.583,1.458 2.75,1.625 0.167,0.167 10 true *b

Connect the 2 water by-pass hoses to the water by-pass pipe sub-assembly and slide the 2 hose clamps to secure them.

Text in Illustration
*a Upward
*b Rearward

HINT:

The direction of the hose clamp is indicated in the illustration.



b.

Install the 3 bolts.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)


Hide 51405A 11.INSTALL NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY

Hide 52129B 12.INSTALL FRONT BUMPER LOWER COVER (w/o TOYOTA Parking Assist-sensor System)

Hide 52822 13.INSTALL AIR INTAKE DUCT LH (w/ TOYOTA Parking Assist-sensor System)

Hide 52821 14.INSTALL AIR INTAKE DUCT RH (w/ TOYOTA Parking Assist-sensor System)

Hide 52129B 15.INSTALL FRONT BUMPER LOWER COVER (w/ TOYOTA Parking Assist-sensor System)

Hide 53298 16.INSTALL COOL AIR INTAKE DUCT (for 4WD with TOYOTA Parking Assist-sensor System)