1.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION)
58910C
2.REMOVE REAR CONSOLE BOX ASSEMBLY
Remove the rear console box assembly (See page Vehicle Interior>INTERIOR PANELS / TRIM>FRONT CONSOLE BOX>REMOVAL).
46410
3.REMOVE NO. 1 PARKING BRAKE CABLE ASSEMBLY
Remove the No. 1 parking brake cable assembly (See page Brake>PARKING BRAKE>PARKING BRAKE PEDAL>REMOVAL).
77100U
4.REMOVE FUEL TANK SUB-ASSEMBLY
Remove the fuel tank sub-assembly (See page Engine / Hybrid System>1GR-FE FUEL>FUEL TANK>REMOVAL).
46590
5.REMOVE NO. 2 PARKING BRAKE SHOE ASSEMBLY WITH PARKING BRAKE SHOE LEVER
Refer to the procedures up to "Remove No. 2 Parking Brake Shoe Assembly with Parking Brake Shoe Lever" (See page Brake>PARKING BRAKE>PARKING BRAKE ASSEMBLY>DISASSEMBLY).
46420
6.REMOVE NO. 2 PARKING BRAKE CABLE ASSEMBLY
Remove the clip and disconnect the No. 2 parking brake cable assembly from the parking brake equalizer.
| *1 | Clip |
Pinch the claws of the No. 2 parking brake cable and push the cable outside of the vehicle slightly.
Remove the 2 bolts and disconnect the No. 2 parking brake cable assembly from the backing plate.
Remove the No. 1 parking brake cable heat insulator.
Remove the 5 bolts from the No. 2 parking brake cable assembly.
| *1 | No. 2 Parking Brake Cable Clamp | *2 | - |
Disconnect the No. 2 parking brake cable clamp from the No. 2 parking brake cable.
46430
7.REMOVE NO. 3 PARKING BRAKE CABLE ASSEMBLY
Remove the clip and disconnect the No. 3 parking brake cable assembly from the parking brake equalizer.
| *1 | Clip |
Pinch the claws of the No. 3 parking brake cable and push the cable outside of the vehicle slightly.
Remove the 2 bolts and disconnect the No. 3 parking brake cable assembly from the backing plate.
Remove the 4 bolts from the No. 3 parking brake cable assembly.
| *1 | No. 3 Parking Brake Cable Clamp | - | - |
Disconnect the No. 3 parking brake cable clamp No. 3 parking brake cable.