55475A
1.REMOVE NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH
67910
2.REMOVE DOOR SCUFF PLATE ASSEMBLY RH
62111C
3.REMOVE COWL SIDE TRIM BOARD RH
55607
4.REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
55312
5.REMOVE LOWER INSTRUMENT PANEL
55443A
6.REMOVE INSTRUMENT PANEL BOX DOOR COVER
55303B
7.REMOVE LOWER INSTRUMENT PANEL SUB-ASSEMBLY
85530D
8.REMOVE NO. 2 POWER POINT SOCKET ASSEMBLY
Using a screwdriver, detach the claw and remove the power point socket.
| *1 | Protective Tape |
Tape the screwdriver tip before use.
85535E
9.REMOVE POWER OUTLET SOCKET COVER NO.2
Detach the 2 claws and remove the socket cover.