Home › Audio / Visual / Telematics › AUDIO / VIDEO › AUDIO AND VISUAL SYSTEM

DTC    B15C0    GPS Antenna Connection Malfunction(short)

DTC    B15C1    GPS Antenna Connection Malfunction(break)

for Preparation Click here


DESCRIPTION

These DTCs are stored when a malfunction occurs in the navigation antenna assembly.

DTC No.
DTC Detection Condition
Trouble Area
B15C0
Navigation antenna error
  1. Navigation antenna cord
  2. Navigation antenna assembly
  3. Radio and display receiver assembly
B15C1
Error of the power source to the navigation antenna

INSPECTION PROCEDURE

1.CHECK DTC
  1. Clear the DTCs (Click here).

  1. Recheck for DTCs and check if the same DTC is output again.

    OK:
    No DTCs are output.



NG
Go to step 2
OK

USE SIMULATION METHOD TO CHECK (Click here)  

2.CHECK CONNECTION OF NAVIGATION ANTENNA CORD
  1. Check if the navigation antenna cord is securely connected to the radio and display receiver assembly.

    OK:
    Navigation antenna cord is securely connected.



NG
SECURELY CONNECT NAVIGATION ANTENNA CORD
OK


3.INSPECT NAVIGATION ANTENNA ASSEMBLY
  1. Remove the navigation antenna assembly (Click here).

  1. Inspect the navigation antenna assembly (Click here).



NG
REPLACE NAVIGATION ANTENNA ASSEMBLY (Click here)
OK

REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY (Click here)