WASHER MOTOR (for Front Side) > REMOVAL |
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 2. REMOVE FRONT BUMPER COVER (w/o Intuitive Parking Assist System) |
| 3. REMOVE FRONT BUMPER COVER (w/ Intuitive Parking Assist System) |
| 4. REMOVE FRONT FENDER LINER RH |
| 5. DRAIN WINDSHIELD WASHER FLUID |
![]() |
Disconnect the washer hose from the hose of the windshield washer motor and pump assembly and drain the windshield washer fluid.
| 6. REMOVE WASHER INLET SUB-ASSEMBLY |
![]() |
Detach the clip and remove the washer inlet sub-assembly.
| 7. REMOVE WASHER JAR |
![]() |
Disconnect the connector.
![]() |
Remove the 3 screws.
![]() |
Detach the guide to remove the washer jar.
| 8. REMOVE WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY |
![]() |
Remove the windshield washer motor and pump assembly from the packing of the washer jar.
| *1 | Packing |