REAR FLOOR AIRBAG SENSOR > REMOVAL |
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 2. REMOVE REAR NO. 1 SEAT ASSEMBLY |
for 60/40 Split Double-folding Seat Type LH Side
Remove the rear No. 1 seat assembly (Click here).
for 60/40 Split Double-folding Seat Type RH Side
Remove the rear No. 1 seat assembly (Click here).
for 60/40 Split Slide Walk-in Seat Type LH Side
Remove the rear No. 1 seat assembly (Click here).
for 60/40 Split Slide Walk-in Seat Type RH Side
Remove the rear No. 1 seat assembly (Click here).
| 3. REMOVE REAR NO. 1 FLOOR STEP COVER (w/ Rear No. 2 Seat) |
![]() |
Using a screwdriver, detach the 2 claws to remove the rear No. 1 floor step cover.
| *1 | Protective Tape |
| 4. REMOVE QUARTER SCUFF PLATE LH (w/ Rear No. 2 Seat) |
![]() |
Remove the 2 bolts and quarter scuff plate LH.
| 5. REMOVE QUARTER SCUFF PLATE RH (w/ Rear No. 2 Seat) |
| 6. REMOVE REAR DOOR SCUFF PLATE LH |
Put protective tape around the rear door scuff plate LH.
![]() |
Using a screwdriver, detach the 3 clips, 6 claws and 2 guides to remove the rear door scuff plate LH.
| *1 | Protective Tape |
| 7. REMOVE REAR DOOR SCUFF PLATE RH |
| 8. REMOVE REAR FLOOR SIDE AIRBAG SENSOR COVER |
Fold back the floor carpet.
![]() |
Detach the clip and claw, and remove the cover.
| 9. REMOVE REAR FLOOR SIDE AIRBAG SENSOR |
![]() |
Remove the bolt and sensor.
Disconnect the connector.