TRANSFER SYSTEM > PROBLEM SYMPTOMS TABLE |
| Symptom | Suspected Area | See page |
| Noise | Oil (Level low) |
Click here
|
| Oil (Wrong) |
Click here
| |
| Transfer faulty |
Click here
| |
| Oil leakage | Oil (Level too high) |
Click here
|
| Gasket (Damaged) |
Click here
| |
| Oil seal (Worn or damaged) |
Click here
| |
| O-ring (Worn or damaged) |
Click here
| |
| Switch from HIGH (H4L) to LOW (L4L) is impossible | Harness or connector |
Click here
|
| Transfer shift actuator assembly |
Click here
| |
| CAN communication system |
Click here
| |
| Transfer position switch |
Click here
| |
| Four wheel drive control ECU |
Click here
| |
| Transfer faulty |
Click here
| |
| Switch from LOW (L4L) to HIGH (H4L) is impossible | Harness or connector |
Click here
|
| Transfer shift actuator assembly |
Click here
| |
| CAN communication system |
Click here
| |
| Transfer position switch |
Click here
| |
| Four wheel drive control ECU |
Click here
| |
| Transfer faulty |
Click here
| |
| Switch from FREE (H4F) to LOCK (H4L) is impossible | Harness or connector |
Click here
|
| Transfer shift actuator assembly |
Click here
| |
| CAN communication system |
Click here
| |
| Transfer position switch |
Click here
| |
| Four wheel drive control ECU |
Click here
| |
| Transfer faulty |
Click here
| |
| Switch from LOCK (H4L) to FREE (H4F) is impossible | Harness or connector |
Click here
|
| Transfer shift actuator assembly |
Click here
| |
| CAN communication system |
Click here
| |
| Transfer position switch |
Click here
| |
| Four wheel drive control ECU |
Click here
| |
| Transfer faulty |
Click here
| |
| 4LO indicator light does not come on | Harness or connector |
Click here
|
| Combination meter |
Click here
| |
| CAN communication system |
Click here
| |
| Four wheel drive control ECU |
Click here
| |
| Transfer position switch |
Click here
| |
| Transfer shift actuator assembly |
Click here
| |
| 4LO indicator light remains on | Four wheel drive control ECU |
Click here
|
| Transfer position switch |
Click here
| |
| Combination meter |
Click here
| |
| Center differential lock indicator light does not come on | Harness or connector |
Click here
|
| Combination meter |
Click here
| |
| CAN communication system |
Click here
| |
| Four wheel drive control ECU |
Click here
| |
| Transfer position switch |
Click here
| |
| Transfer shift actuator assembly |
Click here
| |
| Center differential lock indicator light remains on | Four wheel drive control ECU |
Click here
|
| Transfer position switch |
Click here
| |
| Combination meter |
Click here
|