DTC No.
| DTC Detection Condition
- Diagnosis Condition
- Malfunction Status
- Malfunction Time
- Other
| Trouble Area
|
P0965
| - Not learning control prohibited status
- The difference between the shift solenoid valve SL2 operational specified current and operational feedback current is 12 A or more in total.
- Detects "2.Malfunction Status" 2 times consecutively.
- 1-trip detection logic
| - Shift solenoid valve SL2
- Transmission wire
- Harness and connector
- TCM
|
P0966
| - Not learning control prohibited status
1 second or more has elapsed after turning shift solenoid valve SL2 off
- The shift solenoid valve SL1 operational feedback voltage is 0.018 V or less.
- Detects malfunction that continues for 100 ms or more 5 times consecutively.
- 1-trip detection logic
| - Shift solenoid valve SL2
- Transmission wire
- Harness and connector
- TCM
|
P0967
| - Not learning control prohibited status
1 second or more has elapsed after turning shift solenoid valve SL2 on
- The shift solenoid valve SL1 operational feedback voltage is 0.257 V or more.
- Detects malfunction that continues for 100 ms or more 5 times consecutively.
- 1-trip detection logic
| - Shift solenoid valve SL2
- Transmission wire
- Harness and connector
- TCM
|