1. DISCHARGE FUEL SYSTEM PRESSURE
2.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
71470S
3.REMOVE SEPARATE TYPE REAR SEAT CUSHION ASSEMBLY LH
71460S
4.REMOVE SEPARATE TYPE REAR SEAT CUSHION ASSEMBLY RH
58311F
5.REMOVE NO. 2 REAR FLOOR SERVICE HOLE COVER
58311E
6.REMOVE REAR FLOOR SERVICE HOLE COVER
77020A
7.REMOVE FUEL SUCTION TUBE ASSEMBLY WITH PUMP AND GAUGE
77204A
8.REMOVE FUEL TANK RETURN TUBE
9.DRAIN FUEL
51206A
10.REMOVE REAR SUSPENSION MEMBER SUB-ASSEMBLY
77643A
11.REMOVE NO. 3 FUEL TANK PROTECTOR (for Metal Type)
Remove the nut, 2 clips and No. 3 fuel tank protector.
77641A
12.REMOVE NO. 1 FUEL TANK PROTECTOR (for Clamp Type)
Remove the 2 nuts, 2 clip and No. 1 fuel tank protector.
77642A
13.REMOVE NO. 2 FUEL TANK PROTECTOR (for Clamp Type)
Remove the 2 nuts, 2 clips and No. 2 fuel tank protector.
46430
14.REMOVE NO. 3 PARKING BRAKE CABLE ASSEMBLY
46420
15.REMOVE NO. 2 PARKING BRAKE CABLE ASSEMBLY
77213B
16.DISCONNECT FUEL TANK TO FILLER PIPE HOSE (for Metal Type)
Loosen the hose clamp bolt and disconnect the fuel tank to filler pipe hose.
77404
17.DISCONNECT FUEL TANK VENT HOSE SUB-ASSEMBLY (for Metal Type)
Remove the clamp and disconnect the fuel tank vent hose sub-assembly.
Disengage the clamp and separate the tube.
77740
18.SEPARATE CHARCOAL CANISTER ASSEMBLY (for Metal Type)
Disconnect the quick connector as indicated by the arrows in the order shown in the illustration.
77213B
19.DISCONNECT FUEL TANK TO FILLER PIPE HOSE (for Clamp Type)
Loosen the hose clamp bolt and disconnect the fuel tank to filler pipe hose.
77404
20.DISCONNECT FUEL TANK VENT HOSE SUB-ASSEMBLY (for Clamp Type)
Disconnect the fuel tank vent hose sub-assembly.
77226A
21.DISCONNECT NO. 6 FUEL TANK BREATHER TUBE (for Clamp Type)
Remove the clamp and disconnect the No. 6 fuel tank breather tube.
77100
22.REMOVE FUEL TANK ASSEMBLY
Place an engine lifter under the fuel tank assembly.
Remove the 4 bolts, 2 No. 1 fuel tank bands and fuel tank assembly.
77213B
23.REMOVE FUEL TANK TO FILLER PIPE HOSE (for Metal Type)
Loosen the hose clamp bolt and remove the fuel tank to filler pipe hose from the fuel tank.
77213B
24.REMOVE FUEL TANK TO FILLER PIPE HOSE (for Clamp Type)
Loosen the hose clamp bolt and remove the fuel tank to filler pipe hose from the fuel tank.
77204C
25.REMOVE NO. 2 FUEL TANK MAIN TUBE SUB-ASSEMBLY (for Metal Type)
Remove the No. 2 fuel tank main tube sub-assembly from the fuel tank assembly.
Remove the fuel filter from the No. 2 fuel tank main tube sub-assembly.
77204C
26.REMOVE NO. 2 FUEL TANK MAIN TUBE SUB-ASSEMBLY (for Clamp Type)
Remove the No. 2 fuel tank main tube sub-assembly from the fuel tank assembly.
Remove the fuel filter from the No. 2 fuel tank main tube sub-assembly.
77651A
27.REMOVE NO. 1 FUEL TANK CUSHION (for Metal Type)
Remove the 10 No. 1 fuel tank cushions shown in the illustration.
77651A
28.REMOVE NO. 1 FUEL TANK CUSHION (for Clamp Type)
Remove the 10 No. 1 fuel tank cushions shown in the illustration.