Home › Brake › PARKING BRAKE › PARKING BRAKE CABLE
RM2090E _54 Brake _060688 PARKING BRAKE _0297639 PARKING BRAKE CABLE A

PARKING BRAKE  PARKING BRAKE CABLE  REMOVAL  


PROCEDURE

Hide 58810J 1.REMOVE CONSOLE BOX ASSEMBLY

Hide 46410 2.REMOVE NO. 1 PARKING BRAKE CABLE ASSEMBLY

Hide 3.REMOVE PARKING BRAKE ASSEMBLY

Hide 4.REMOVE CLAMP H/B

a.
C256629

Remove the 2 nuts and the clamp H/B.


Hide 84550 5.REMOVE LOWER CASING BRACKET

a.
C260007

Remove the 2 bolts and the lower casing bracket.


Hide 77643A 6.REMOVE NO. 3 FUEL TANK PROTECTOR (for Metal Type)

Hide 77641A 7.REMOVE NO. 1 FUEL TANK PROTECTOR (for Clamp Type)

Hide 77642A 8.REMOVE NO. 2 FUEL TANK PROTECTOR (for Clamp Type)

Hide 17420 9.REMOVE CENTER EXHAUST PIPE ASSEMBLY

a.
A277953

Remove the 2 nuts and the 2 bolts and the 2 compression spring and disconnect the center exhaust pipe assembly.


b.
A277955

Remove the 2 nuts and the 2 bolts and disconnect the tail exhaust pipe assembly.


c.
A277956

Remove the cushion rubber and the center exhaust pipe assembly.


d.

Remove the gasket.


Hide 37100 10.REMOVE PROPELLER WITH CENTER BEARING SHAFT ASSEMBLY

Hide 46430 11.REMOVE NO. 3 PARKING BRAKE CABLE ASSEMBLY

a.

Remove the 4 bolts and separate the No. 3 parking brake cable assembly from the vehicle.

C257525

Text in illustration
V100135

Bolt
V100136

Vehicle Front Side


b.
C260002

Remove the clamp and remove the No. 3 parking brake cable assembly.


Hide 46420 12.REMOVE NO. 2 PARKING BRAKE CABLE ASSEMBLY

HINT:

Use the same No. 3 parking brake cable assembly as for the No. 2 parking brake cable assembly.