17701
1.REMOVE AIR CLEANER CASE SUB-ASSEMBLY
Disengage the clamp, and disconnect the mass air flow meter connector.
Remove the 3 bolts.
Loosen the hose clamp, and disconnect the hose.
Remove the air cleaner case sub-assembly.
52119A
2.REMOVE FRONT BUMPER COVER
51441
3.REMOVE NO. 1 ENGINE UNDER COVER
4.DRAIN ENGINE COOLANT
16572
5.DISCONNECT OUTLET RADIATOR HOSE
16470
6.REMOVE RADIATOR RESERVE TANK ASSEMBLY
Remove the 2 bolts and radiator reserve tank assembly.
17764
7.REMOVE AIR CLEANER DUCT
Remove the 2 bolts and air cleaner duct.
53291B
8.REMOVE RADIATOR COVER PLATE
Remove the 6 clips and radiator cover plate.
16502
9.REMOVE WATER FILLER SUB-ASSEMBLY
Disconnect the radiator cap hose.
Detach the 2 water hose clamps.
Disconnect the inlet radiator hose and No. 1 radiator hose.
Since the radiator hose must be attached in the correct position, apply matchmarks before removing it.
Remove the 4 bolts and the water filler sub-assembly with water filler bracket.
53510
10.REMOVE HOOD LOCK ASSEMBLY (for LHD)
53510
11.REMOVE HOOD LOCK ASSEMBLY (for RHD)
53201
12.REMOVE RADIATOR SUPPORT SUB-ASSEMBLY
Remove the 2 bolts.
Remove the 4 bolts and radiator support sub-assembly.
88460
13.SEPARATE COOLER CONDENSER ASSEMBLY
Remove the bolt.
Remove the bolt.
Remove the bolt.
Remove the bolt A.
Remove the bolt B and separate the cooler condenser assembly from the radiator assembly.
16711
14.REMOVE FAN SHROUD
16400
15.REMOVE RADIATOR ASSEMBLY
Remove the 2 bolts and radiator support RH.
Remove the 2 bolts and radiator support LH.
Detach the claw and disconnect the thermistor assembly.
While lifting the outlet radiator hose, remove the radiator assembly.
Insert cardboard or a blanket between the radiator assembly and the cooler condenser assembly to protect the cooler condenser assembly.
| *1 | Cooler condenser assembly |
| *2 | Cardboard or Blanket |
| *3 | Radiator assembly |
Remove the 2 radiator support cushions.
16571
16.REMOVE INLET RADIATOR HOSE
Remove the clamp and the inlet radiator hose from the water filler sub-assembly.
Since the radiator hose must be attached in the correct position, apply matchmarks before removing it.
16571C
17.REMOVE NO. 1 RADIATOR HOSE
Remove the clamp and No. 1 radiator hose from the radiator assembly.
| *1 | No. 1 radiator hose |
Since the radiator hose must be attached in the correct position, apply matchmarks before removing it.
16572
18.REMOVE OUTLET RADIATOR HOSE
Remove the clamp and outlet radiator hose from the radiator assembly.
| *1 | Outlet radiator hose |
Since the radiator hose must be attached in the correct position, apply matchmarks before removing it.
16465
19.REMOVE RADIATOR PACKING (UPPER)
Remove the radiator packing.
| *1 | Radiator Packing |
16465A
20.REMOVE NO. 1 RADIATOR PACKING
Remove the No. 1 radiator packing.
| *1 | No. 1 Radiator Packing |
16465B
21.REMOVE NO. 2 RADIATOR PACKING
Remove the No. 2 radiator packing.
| *1 | No. 2 Radiator Packing |
16468
22.REMOVE RADIATOR PACKING (LOWER)
Remove the radiator packing.
| *1 | Radiator Packing |