Home › Suspension › TIRE PRESSURE MONITORING › TIRE PRESSURE WARNING RECEIVER › from 2014.05
RM2090E _53 Suspension _060682 TIRE PRESSURE MONITORING _0297612 TIRE PRESSURE WARNING RECEIVER A

TIRE PRESSURE MONITORING  TIRE PRESSURE WARNING RECEIVER  INSTALLATION  


PROCEDURE

Hide 89741 1.INSTALL TIRE PRESSURE WARNING RECEIVER

a.

Engage the guide and install the tire pressure warning receiver.


b.

Install the bolt.

Torque:
13 N*m (133 kgf*cm, 10 ft.*lbf)


c.

Connect the connector.

NOTICE:
·

Do not drop the tire pressure warning receiver or apply impact on it.

·

When replacing or inspecting the tire pressure warning receiver, do not change the wiring route or the length of the harness around the receiver.




Hide 64330 2.INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY

Hide 62462A 3.INSTALL REAR WINDOW SIDE GARNISH LH

Hide 62461A 4.INSTALL REAR WINDOW SIDE GARNISH RH

HINT:

Use the same procedure described for the LH side.


Hide 62606A 5.INSTALL QUARTER TRIM LID SUB-ASSEMBLY LH

Hide 62605Q 6.INSTALL QUARTER TRIM LID SUB-ASSEMBLY RH

HINT:

Use the same procedure described for the LH side.


Hide 64715D 7.INSTALL LUGGAGE COMPARTMENT TRIM COVER LH

Hide 64714D 8.INSTALL LUGGAGE COMPARTMENT TRIM COVER RH

HINT:

Use the same procedure described for the LH side.


Hide 64722 9.CONNECT LUGGAGE COMPARTMENT INNER TRIM COVER LH

Hide 64721 10.CONNECT LUGGAGE COMPARTMENT INNER TRIM COVER RH

HINT:

Use the same procedure described for the LH side.


Hide 67913 12.INSTALL FRONT DOOR SCUFF PLATE RH

HINT:

Use the same procedure described for the LH side.


Hide 62312B 13.INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH

Hide 62311B 14.INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH

HINT:

Use the same procedure described for the LH side.


Hide 71470S 15.INSTALL SEPARATE TYPE REAR SEAT CUSHION ASSEMBLY LH

Hide 71460S 16.INSTALL SEPARATE TYPE REAR SEAT CUSHION ASSEMBLY RH

HINT:

Use the same procedure described for the LH side.