Home › Steering › STEERING COLUMN › STEERING WHEEL › from 2016.06
RM2090E _55 Steering _060690 STEERING COLUMN _0297647 STEERING WHEEL A

STEERING COLUMN  STEERING WHEEL  INSTALLATION  


CAUTION / NOTICE / HINT

NOTICE:
·

Do not replace the spiral cable with the battery connected and the ignition switch ON.

·

Do not rotate the spiral cable without the steering wheel with the battery connected and the ignition switch ON.

·

Ensure that the steering wheel is installed and aligned straight when inspecting the steering sensor.



PROCEDURE

Hide 45116 1.INSTALL NO. 1 STEERING WHEEL ORNAMENT (w/o Steering Pad Switch)

a.

Engage the 4 claws, and install the No. 1 steering wheel ornament with the 2 screws.


Hide 45184 2.INSTALL LOWER STEERING WHEEL BOSS COVER

a.

Engage the 4 claws to install the lower steering wheel boss cover to the steering wheel assembly.


Hide 45713A 3.INSTALL STEERING SHAKE DAMPER

a.

Install the steering shake damper to the steering wheel assembly with the 2 screws.


Hide 4.ALIGN FRONT WHEELS FACING STRAIGHT AHEAD

Hide 5.ADJUST SPIRAL CABLE WITH SENSOR SUB-ASSEMBLY

Hide 6.INSTALL STEERING PAD SWITCH ASSEMBLY (w/ Steering Pad Switch)

Hide 84630 7.INSTALL CRUISE CONTROL MAIN SWITCH ASSEMBLY (w/ Cruise Control System)

Hide 84610F 8.INSTALL SHIFT PADDLE SWITCH (TRANSMISSION SHIFT SWITCH ASSEMBLY) (for Automatic Transmission)

Hide 45111 9.INSTALL STEERING WHEEL ASSEMBLY

a.
C364398E01
1.802,0.5 2.115,0.5 true 1.792,0.719 2.104,0.5 true 2.167,0.406 2.708,0.76 0.542,0.354 10 false *1

Install the steering wheel assembly aligning the matchmarks on the steering wheel assembly and steering column assembly.

Text in Illustration
*1 Matchmark


b.

Install the steering wheel assembly set nut.

Torque:
39 N*m (398 kgf*cm, 29 ft.*lbf)


c.

Connect the connectors to the spiral cable sub-assembly and steering wheel assembly.


Hide 11.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque:
6.0 N*m (61 kgf*cm, 53 in.*lbf)

Hide 12.CHECK STEERING WHEEL CENTER POINT