Home › Engine / Hybrid System › 3SZ-VE ENGINE MECHANICAL › REAR CRANKSHAFT OIL SEAL › 2011.11–2015.08
RM19Y0E _51 Engine / Hybrid System _002969 3SZ-VE ENGINE MECHANICAL _0014996 REAR CRANKSHAFT OIL SEAL A

3SZ-VE ENGINE MECHANICAL  REAR CRANKSHAFT OIL SEAL  INSTALLATION  


PROCEDURE

Hide 11381A 1.INSTALL REAR ENGINE OIL SEAL

a.

Apply a light coat of MP grease to the lip of a new oil seal.

NOTICE:

Keep the lip free from foreign matter.



b.
A107949N07
2.146,0.604 1.958,0.958 false 2.448,1.969 2.177,2.542 false 2.438,1.969 1.823,2.156 true 2.198,0.479 2.833,0.844 0.635,0.365 10 SST 2.49,1.854 3.042,2.229 0.552,0.375 10 SST 1.615,0.073 1.906,0.396 0.292,0.323 10 - 1.208,0.063 1.594,0.438 0.385,0.375 10 +

Using SST, install a new rear engine oil seal.

SST
09223-15030  
09950-70010  (09951-07100)

NOTICE:
·

Do not tap the oil seal at an angle.

·

Wipe off extra grease from the crankshaft.



HINT:
Oil seal tap in depth:

-0.5 to 1.0 mm (-0.020 to 0.039 in.)


Protrusion of seal from edge:

0.5 mm (0.020 in.) or less


Depth of seal from edge:

1.0 mm (0.039 in.) or less



Hide 13405 2.INSTALL FLYWHEEL SUB-ASSEMBLY (for Manual Transmission)

Hide 31250 3.INSTALL CLUTCH DISC ASSEMBLY (for Manual Transmission)

Hide 31210 4.INSTALL CLUTCH COVER ASSEMBLY (for Manual Transmission)

Hide 5.INSTALL TRANSMISSION ASSEMBLY (for Manual Transmission)

Hide 32101 6.INSTALL DRIVE PLATE AND RING GEAR SUB-ASSEMBLY (for Automatic Transmission)

Hide 7.INSTALL TRANSMISSION ASSEMBLY (for Automatic Transmission)