1.REMOVE ENGINE HANGERS
Remove the 2 bolts and engine hangers.
19100P
2.REMOVE SPARK PLUG
Using a spark plug wrench, remove the 4 spark plugs.
12108
3.REMOVE OIL FILLER CAP SUB-ASSEMBLY
Remove the oil filler cap sub-assembly from the cylinder head cover sub-assembly.
11201
4.REMOVE CYLINDER HEAD COVER SUB-ASSEMBLY
11213
5.REMOVE CYLINDER HEAD COVER GASKET
Remove the cylinder head cover gasket from the cylinder head cover sub-assembly.
15330
6.REMOVE CAM TIMING OIL CONTROL VALVE ASSEMBLY
Remove the bolt and cam timing oil control valve.
13471
7.REMOVE CRANKSHAFT PULLEY
12101
8.REMOVE OIL PAN SUB-ASSEMBLY
Remove the 11 bolts and 3 nuts.
Using oil pan seal cutter, remove the oil pan sub-assembly from the cylinder block.
15104
9.REMOVE OIL STRAINER SUB-ASSEMBLY
Remove the 7 bolts and the oil pan baffle plate.
Remove the bolt and oil strainer sub-assembly.
11302
10.REMOVE TIMING CHAIN OR BELT COVER SUB-ASSEMBLY
11302A
11.REMOVE TIMING CHAIN OR BELT COVER OIL SEAL
19315
12.REMOVE NO. 1 CRANKSHAFT POSITION SENSOR PLATE
13545
13.REMOVE CHAIN TENSIONER PLUNGER
13506
14.REMOVE CHAIN SUB-ASSEMBLY
13566B
15.REMOVE TIMING CHAIN GUIDE
13591
16.REMOVE TIMING CHAIN TENSION ARM
15708
17.REMOVE NO. 1 OIL NOZZLE SUB-ASSEMBLY
15100
18.REMOVE OIL PUMP ASSEMBLY
13520
19.REMOVE CAMSHAFT TIMING SPROCKET ASSEMBLY
Using the hexagonal lobe of the camshaft, remove the camshaft timing sprocket assembly.
Remove the camshaft timing sprocket assembly from the camshaft.
20.REMOVE CAMSHAFT
13523
21.REMOVE CAMSHAFT TIMING GEAR OR SPROCKET
Clamp No. 2 camshaft in a vise.
Remove the 3 bolts and the camshaft timing gear or sprocket.
Be careful not to damage the camshaft.
15601
22.REMOVE OIL FILTER SUB-ASSEMBLY
Using SST, remove the oil filter sub-assembly.
15609
23.REMOVE OIL FILTER BRACKET SUB-ASSEMBLY
Remove the 2 bolts and the oil filter bracket sub-assembly.
11432M
24.REMOVE CYLINDER BLOCK UNION
Using a 12 mm socket hexagon wrench, remove the cylinder block union.
83530
25.REMOVE ENGINE OIL PRESSURE SWITCH ASSEMBLY
11381
26.REMOVE REAR ENGINE OIL SEAL RETAINER
Remove the 4 bolts and the rear engine oil seal retainer.
11381A
27.REMOVE REAR ENGINE OIL SEAL
Using a screwdriver with its tip wrapped in protective tape, remove the rear engine oil seal.
11101
28.REMOVE CYLINDER HEAD SUB-ASSEMBLY
11115
29.REMOVE CYLINDER HEAD GASKET