G9230
1.INSTALL BATTERY COOLING BLOWER ASSEMBLY
Engage the 2 claws.
install the 3 bolts to install the battery cooling blower assembly.
Be sure not to touch the fan part of the battery cooling blower assembly.
Do not lift the battery cooling blower assembly using the wire harness.
Engage the 2 clamps.
Connect the battery cooling blower assembly connector.
71033
2.INSTALL REAR SEAT CUSHION LEG SUB-ASSEMBLY
for NICKEL METAL HYDRIDE BATTERY:
for LITHIUM-ION BATTERY:
76971G
3.INSTALL REAR UNDER COVER
for NICKEL METAL HYDRIDE BATTERY:
for LITHIUM-ION BATTERY:
76974F
4.INSTALL REAR UNDER SIDE COVER LH
67918A
5.INSTALL REAR DOOR SCUFF PLATE LH
76973F
6.INSTALL REAR UNDER SIDE COVER RH
Use the same procedure as for the LH side.
67917A
7.INSTALL REAR DOOR SCUFF PLATE RH
Use the same procedure as for the LH side.
72693
8.INSTALL REAR SEAT CUSHION LOCK HOOK
9.INSTALL BENCH TYPE REAR SEAT CUSHION ASSEMBLY