Home › Drivetrain › K313 (MULTIDRIVE / CVT) › PARK / NEUTRAL POSITION SWITCH
RM32H0E _52 Drivetrain _059624 K313 MULTIDRIVE / CVT _0299313 PARK / NEUTRAL POSITION SWITCH N

K313 MULTIDRIVE / CVT  PARK / NEUTRAL POSITION SWITCH  ADJUSTMENT  


PROCEDURE

Hide 1.SECURE VEHICLE

a.

Fully apply the parking brake and chock a wheel.

CAUTION:
·
C332327

Make sure to apply the parking brake and chock a wheel before performing this procedure.

·

If the vehicle is not secure and the shift lever is moved to N, the vehicle may suddenly move, possibly resulting in an accident or serious injury.




Hide 53141F 2.REMOVE RADIATOR COVER

Hide 17751 3.REMOVE NO. 1 AIR CLEANER INLET

Hide 17705 4.REMOVE AIR CLEANER CAP SUB-ASSEMBLY

Hide 17701 5.REMOVE AIR CLEANER CASE SUB-ASSEMBLY

Hide 84540 6.ADJUST PARK/NEUTRAL POSITION SWITCH

a.
C310231

Loosen the 2 bolts of the park/neutral position switch.


b.
C310232C02
0.573,0.521 0.74,0.521 0.74,0.521 1.281,0.844 true 2.177,0.188 1.906,0.188 1.906,0.188 1.417,1 true 0.385,0.448 0.625,0.604 0.24,0.156 10 true *a 2.219,0.115 2.448,0.281 0.229,0.167 10 true *b
*a Neutral Basic Line
*b Protrusion


Align the protrusion with the neutral basic line.


c.

Hold the park/neutral position switch in that position and tighten the 2 bolts.

Torque:
5.4 N*m (55 kgf*cm, 48 in.*lbf)


Hide 17701 7.INSTALL AIR CLEANER CASE SUB-ASSEMBLY

Hide 17705 8.INSTALL AIR CLEANER CAP SUB-ASSEMBLY

Hide 17751 9.INSTALL NO. 1 AIR CLEANER INLET

Hide 53141F 10.INSTALL RADIATOR COVER

Hide 84540 11.INSPECT PARK/NEUTRAL POSITION SWITCH