Home › Vehicle Interior › HEATING / AIR CONDITIONING › AIR CONDITIONING SYSTEM (for Manual Air Conditioning System)
RM32H0E _58 Vehicle Interior _059841 HEATING / AIR CONDITIONING _0298709 AIR CONDITIONING SYSTEM(for Manual Air Conditioning System) C

HEATING / AIR CONDITIONING  AIR CONDITIONING SYSTEM(for Manual Air Conditioning System)  B1443  Air Outlet Damper Control Servo Motor Circuit  


DESCRIPTION

According to signals from the air conditioning amplifier assembly that are based on user operation or air conditioning system control, the air conditioning radiator damper servo sub-assembly (mode switching) actuates the servo motor to perform air outlet mode switching.

DTC No. Detection Item DTC Detection Condition Trouble Area Memory
B1443 Air Outlet Damper Control Servo Motor Circuit Any of the following conditions is met:
·

No. 2 air conditioning radiator damper servo sub-assembly (mode switching) drive terminal is open circuit

·

No. 2 air conditioning radiator damper servo sub-assembly (mode switching) drive terminal is short circuit


·

No. 2 air conditioning radiator damper servo sub-assembly (mode switching)

·

Air conditioning harness assembly (heater radiator unit sub-assembly)

·

Air conditioning amplifier assembly


Memorized
(30 seconds or more)*1

*1: The air conditioning amplifier assembly stores this DTC if the malfunction has occurred for the period of time indicated in the brackets.


DTC Detection Conditions
Vehicle Condition
Pattern 1 Pattern 2
Diagnosis Condition Ignition switch ON ○ ○
Malfunction Status No. 2 air conditioning radiator damper servo sub-assembly (mode switching) drive terminal is open circuit ○ -
No. 2 air conditioning radiator damper servo sub-assembly (mode switching) drive terminal is short circuit - ○
Detection Time 30 seconds or more 30 seconds or more
Number of Trips 1 trip 1 trip

HINT:

DTC will be output when conditions for either of the patterns in the table above are met.


WIRING DIAGRAM

E357700E03
0.844,0.229 1.615,0.427 0.771,0.198 10 false Micon 0.521,0.625 1.625,0.823 1.104,0.198 10 false Power Supply IC 0.76,1.688 1.052,1.885 0.292,0.198 10 false IC 1.344,1.25 2.115,1.448 0.771,0.198 10 false A1AO 1.396,1.719 2.167,1.917 0.771,0.198 10 false BAO 1.188,2.229 1.958,2.427 0.771,0.198 10 false Micon 1.302,2.719 2.073,2.917 0.771,0.198 10 false A2AO 1.302,3.167 2.073,3.365 0.771,0.198 10 false B1AO 1.281,3.792 2.052,3.99 0.771,0.198 10 false B2AO 0.146,4.375 0.917,4.573 0.771,0.198 10 false F7A 0.156,4.542 1.729,5.083 1.573,0.542 10 false Air Conditioning Amplifier Assembly 1.771,1.26 2.01,1.49 0.24,0.229 10 false 16 1.792,2.719 2.031,2.948 0.24,0.229 10 false 4 1.781,3.167 2.021,3.396 0.24,0.229 10 false 8 1.781,3.792 2.021,4.021 0.24,0.229 10 false 6 1.875,4.406 4.125,4.938 2.25,0.531 10 false Air Conditioning Harness Assembly (Heater Radiator Unit Sub-assembly) 4.417,4.385 5.188,4.583 0.771,0.198 10 false AO 4.438,4.552 6.771,5.115 2.333,0.563 10 false No. 2 air conditioning radiator damper servo sub-assembly (mode switching) 4.135,1.25 4.375,1.479 0.24,0.229 10 false 1 4.146,1.698 4.385,1.927 0.24,0.229 10 false 2 4.135,2.698 4.375,2.927 0.24,0.229 10 false 3 4.135,3.146 4.375,3.375 0.24,0.229 10 false 4 4.125,3.792 4.365,4.021 0.24,0.229 10 false 6 4.344,1.25 5.115,1.448 0.771,0.198 10 false A1AO 4.333,1.708 5.104,1.906 0.771,0.198 10 false BAO 4.344,2.698 5.115,2.896 0.771,0.198 10 false A2AO 4.323,3.156 5.094,3.354 0.771,0.198 10 false B1AO 4.333,3.792 5.104,3.99 0.771,0.198 10 false B2AO 1.781,1.708 2.021,1.938 0.24,0.229 10 false 32

CAUTION / NOTICE / HINT

HINT:

When installing the damper servo motor, make sure to install it correctly.

Click hereVehicle Interior>HEATING / AIR CONDITIONING>AIR CONDITIONING UNIT (for VALEO Made)>REASSEMBLY


PROCEDURE

1.PERFORM ACTIVE TEST USING GTS (AIR OUTLET (FRONT))
a.

Connect the GTS to the DLC3.


b.

Turn the ignition switch ON.


c.

Turn the GTS on.


d.

Enter the following menus: Body Electrical / Air Conditioner / Active Test.


e.

Perform the Active Test according to the display on the GTS.

Body Electrical > Air Conditioner > Active Test
Tester Display Measurement Item Control Range Diagnostic Note
Air Outlet (Front) No. 2 air conditioning radiator damper servo sub-assembly (mode switching) Min.: 0
Max.: 100
Operates between
0 to 100%
Body Electrical > Air Conditioner > Active Test
Tester Display
Air Outlet (Front)
50004 121 203
OK:

No. 2 air conditioning radiator damper servo sub-assembly (mode switching) operates normally.



Result:
Result Proceed to
NG (When troubleshooting according to Problem Symptoms Table) A
NG (When troubleshooting according to the DTC) B
OK (When troubleshooting according to Problem Symptoms Table) C
OK (When troubleshooting according to the DTC) D



A

2.INSPECT NO. 2 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY (MODE SWITCHING) (MOTOR, LINK, DAMPER)

B

4.INSPECT AIR CONDITIONING HARNESS ASSEMBLY (HEATER RADIATOR UNIT SUB-ASSEMBLY)

C

D

7.CHECK FOR DTC
2.INSPECT NO. 2 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY (MODE SWITCHING) (MOTOR, LINK, DAMPER)
a.

Check for a wire harness caught between the links of the motors and dampers.

OK:

No wire harnesses are caught between the links of the motors and dampers.



Result:
Proceed to
OK
NG



OK

3.INSPECT AIR CONDITIONING RADIATOR ASSEMBLY (DAMPER)

NG

REMOVE PINCHED WIRE HARNESS

3.INSPECT AIR CONDITIONING RADIATOR ASSEMBLY (DAMPER)
a.

Remove the No. 2 air conditioning radiator damper servo sub-assembly (mode switching).

Click hereVehicle Interior>HEATING / AIR CONDITIONING>AIR CONDITIONING UNIT (for VALEO Made)>DISASSEMBLY


b.

Operate the dampers by hand.

OK:

The dampers are easily operated by hand.



Result:
Proceed to
OK
NG



OK

4.INSPECT AIR CONDITIONING HARNESS ASSEMBLY (HEATER RADIATOR UNIT SUB-ASSEMBLY)

NG

REPLACE NO. 2 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY (MODE SWITCHING)

4.INSPECT AIR CONDITIONING HARNESS ASSEMBLY (HEATER RADIATOR UNIT SUB-ASSEMBLY)
a.

Remove the air conditioning harness assembly (heater radiator unit sub-assembly).

Click hereVehicle Interior>HEATING / AIR CONDITIONING>AIR CONDITIONING UNIT (for VALEO Made)>DISASSEMBLY


b.
E357701C16
1.583,0.333 2.083,0.583 0.5,0.25 1.375,2.146 1.781,2.396 0.406,0.25 1.823,2.979 2.333,2.521 true 1.823,3.125 2.344,2.833 true 1.833,3.219 2.417,3.208 true 1.177,2.813 1.667,2.99 true 1.125,3.229 1.667,3.219 true 2.656,1.833 2.344,1.344 true 1.969,1.781 1.948,1.458 true 0.646,1.688 1.156,1.344 true 1.542,1.813 1.542,1.354 true 1.094,1.833 1.333,1.354 true 1.688,0.344 2.01,0.542 0.323,0.198 10 false F7A 0.458,0.573 0.771,0.729 0.313,0.156 10 false *a 0.438,2.208 0.75,2.365 0.313,0.156 10 false *b 1.49,2.188 1.813,2.385 0.323,0.198 10 false AO 2.375,2.375 2.833,2.583 0.458,0.208 10 false A1AO 2.406,2.75 2.865,2.958 0.458,0.208 10 false BAO 2.479,3.115 2.938,3.323 0.458,0.208 10 false A2AO 0.74,3.146 1.198,3.354 0.458,0.208 10 false B2AO 0.792,2.677 1.25,2.885 0.458,0.208 10 false B1AO 2.604,1.854 3.063,2.063 0.458,0.208 10 false A1AO 1.854,1.802 2.313,2.01 0.458,0.208 10 false BAO 1.354,1.823 1.813,2.031 0.458,0.208 10 false B1AO 0.865,1.875 1.323,2.083 0.458,0.208 10 false B2AO 0.26,1.625 0.719,1.833 0.458,0.208 10 false A2AO
*a Front view of wire harness connector
(to Air Conditioning Amplifier Assembly)
*b Front view of wire harness connector
(to No. 2 air conditioning radiator damper servo sub-assembly (mode switching))


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
F7A-16 (A1AO) - AO-1 (A1AO) Always Below 1 Ω
F7A-32 (BAO) - AO-2 (BAO) Always Below 1 Ω
F7A-4 (A2AO) - AO-3 (A2AO) Always Below 1 Ω
F7A-8 (B1AO) - AO-4 (B1AO) Always Below 1 Ω
F7A-6 (B2AO) - AO-6 (B2AO) Always Below 1 Ω
F7A-16 (A1AO) or AO-1 (A1AO) - Body ground Always 10 kΩ or higher
F7A-32 (BAO) or AO-2 (BAO) - Body ground Always 10 kΩ or higher
F7A-4 (A2AO) or AO-3 (A2AO) - Body ground Always 10 kΩ or higher
F7A-8 (B1AO) or AO-4 (B1AO) - Body ground Always 10 kΩ or higher
F7A-6 (B2AO) or AO-6 (B2AO) - Body ground Always 10 kΩ or higher



Result:
Proceed to
OK
NG



OK

5.REPLACE NO. 2 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY (MODE SWITCHING)

NG

REPLACE AIR CONDITIONING HARNESS ASSEMBLY (HEATER RADIATOR UNIT SUB-ASSEMBLY)

5.REPLACE NO. 2 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY (MODE SWITCHING)
a.

Replace the No. 2 air conditioning radiator damper servo sub-assembly (mode switching) with a new one or the No. 1 blower damper servo sub-assembly (fresh/recirculation) if it is functioning properly.

Click hereVehicle Interior>HEATING / AIR CONDITIONING>BLOWER UNIT (for VALEO Made)>DISASSEMBLY


Result:
Proceed to
NEXT



NEXT

6.PERFORM ACTIVE TEST USING GTS (AIR OUTLET (FRONT))
6.PERFORM ACTIVE TEST USING GTS (AIR OUTLET (FRONT))
a.

Connect the GTS to the DLC3.


b.

Turn the ignition switch ON.


c.

Turn the GTS on.


d.

Enter the following menus: Body Electrical / Air Conditioner / Active Test.


e.

Perform the Active Test according to the display on the GTS.

Body Electrical > Air Conditioner > Active Test
Tester Display Measurement Item Control Range Diagnostic Note
Air Outlet (Front) No. 2 air conditioning radiator damper servo sub-assembly (mode switching) Min.: 0
Max.: 100
Operates between
0 to 100%
Body Electrical > Air Conditioner > Active Test
Tester Display
Air Outlet (Front)
50004 121 203
OK:

No. 2 air conditioning radiator damper servo sub-assembly (mode switching) operates normally.



Result:
Proceed to
OK
NG



OK

REPLACE NO. 2 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY (MODE SWITCHING)

NG

7.CHECK FOR DTC
7.CHECK FOR DTC
a.

Clear the DTCs.

Click hereVehicle Interior>HEATING / AIR CONDITIONING>AIR CONDITIONING SYSTEM (for Manual Air Conditioning System)>DTC CHECK / CLEAR

Body Electrical > Air Conditioner > Clear DTCs
50002 121

b.

Check for DTCs.

Click hereVehicle Interior>HEATING / AIR CONDITIONING>AIR CONDITIONING SYSTEM (for Manual Air Conditioning System)>DTC CHECK / CLEAR

Body Electrical > Air Conditioner > Trouble Codes
50001 121

Result:
Result Proceed to
DTCs are not output A
DTCs are output B



A

B

REPLACE AIR CONDITIONING AMPLIFIER ASSEMBLY