Home › Vehicle Interior › HEATING / AIR CONDITIONING › AIR CONDITIONING SYSTEM (for Automatic Air Conditioning System with Side-mounted Air Conditioner Pressure Sensor) › from 2019.09
RM32H0E _58 Vehicle Interior _059841 HEATING / AIR CONDITIONING _0298708 AIR CONDITIONING SYSTEM(for Automatic Air Conditioning System with Side-mounted Air Conditioner Pressure Sensor) C

HEATING / AIR CONDITIONING  AIR CONDITIONING SYSTEM(for Automatic Air Conditioning System with Side-mounted Air Conditioner Pressure Sensor)  B1441  Air Mix Damper Control Servo Motor Circuit (Passenger Side)  


DESCRIPTION

The No. 1 air conditioning radiator damper servo sub-assembly sends pulse signals to inform the air conditioning amplifier assembly of the damper position. The air conditioning amplifier assembly activates the motor (normal or reverse) based on these signals to move the air mix damper to the appropriate position. This adjusts the amount of air passing through the heater core after passing the evaporator and controls the temperature of the output air. The air conditioning amplifier assembly communicates with the servo through a communication/driver IC and wiring assembly called the air conditioning harness assembly.

DTC No. Detection Item DTC Detection Condition Trouble Area Memory
B1441 Air Mix Damper Control Servo Motor Circuit (Passenger Side) Air mix damper position sensor value does not change even if air conditioning amplifier assembly operates No. 1 air conditioning radiator damper servo sub-assembly
·

No. 1 air conditioning radiator damper servo sub-assembly

·

Air conditioning harness assembly

·

Air conditioning amplifier assembly

·

Air conditioning radiator assembly


Memorized
(30 seconds or more)*

*: The air conditioning amplifier assembly stores this DTC if the malfunction has occurred for the period of time indicated in the brackets.


WIRING DIAGRAM

E341943E58
0.792,8.531 3.083,8.792 2.292,0.26 10 false : LIN Communication Line 0.531,1.406 3.74,1.604 3.208,0.198 10 false Driver Side Air Mix*1 0.188,1.708 3.396,1.906 3.208,0.198 10 false Front Passenger Side Air Mix*2 0.719,3.396 3.927,3.594 3.208,0.198 10 false Mode Switching 0.167,5.375 3.375,5.573 3.208,0.198 10 false Front Passenger Side Air Mix*1 0.49,5.677 3.698,5.875 3.208,0.198 10 false Driver Side Air Mix*2 0.573,6.188 2.5,6.635 1.927,0.448 10 false No. 1 Air Conditioning Radiator Damper Servo Sub-assembly 0.208,8.177 3.448,8.438 3.24,0.26 10 false No. 1 Blower Damper Servo Sub-assembly 3.167,8.073 6.406,8.333 3.24,0.26 10 false Air Conditioning Harness Assembly 5.49,8.104 7.094,8.573 1.604,0.469 10 false Air Conditioning Amplifier Assembly 5.49,7.938 7.094,8.406 1.604,0.469 10 false m5 2.875,8.542 6.115,8.802 3.24,0.26 10 false *1: for LHD 3.885,8.531 6.635,8.802 2.75,0.271 10 false *2: for RHD 5.344,0.292 5.771,0.479 0.427,0.188 10 false 4 5.344,1.135 5.771,1.323 0.427,0.188 10 false 3 5.354,2.063 5.781,2.25 0.427,0.188 10 false 2 5.542,0.292 7.031,0.51 1.49,0.219 10 false BUSB 5.542,1.177 7.031,1.396 1.49,0.219 10 false BUS 5.531,2.073 7.021,2.292 1.49,0.219 10 false BUSG 6.625,0.281 7.052,0.469 0.427,0.188 10 false +B 6.75,1.292 7.156,1.479 0.406,0.188 10 false IC 3.042,0.271 3.469,0.458 0.427,0.188 10 false 8 3.042,1.135 3.469,1.323 0.427,0.188 10 false 7 3.042,2.052 3.469,2.24 0.427,0.188 10 false 6 3.031,5.552 3.458,5.74 0.427,0.188 10 false 5 3.031,4.771 3.458,4.958 0.427,0.188 10 false 4 3.031,4.542 3.458,4.729 0.427,0.188 10 false 3 3.031,5.365 3.458,5.552 0.427,0.188 10 false 2 3.031,4.979 3.458,5.167 0.427,0.188 10 false 1 3.031,6.844 3.458,7.031 0.427,0.188 10 false 1 3.031,7.646 3.458,7.833 0.427,0.188 10 false 3 3.042,7.063 3.469,7.25 0.427,0.188 10 false 4 3.031,7.448 3.458,7.635 0.427,0.188 10 false 2 3.042,7.25 3.469,7.438 0.427,0.188 10 false 5 0.583,6.031 1.01,6.219 0.427,0.188 10 false m2 0.219,8.031 0.646,8.219 0.427,0.188 10 false m4

CAUTION / NOTICE / HINT

HINT:
·

Confirm that no mechanical problem is present because this DTC can be output when either a damper link or damper is mechanically locked.

·

When installing the damper servo motor, make sure to install it correctly.

Click hereVehicle Interior>HEATING / AIR CONDITIONING>AIR CONDITIONING UNIT (for DENSO Made)>REASSEMBLY



PROCEDURE

1.CHECK FOR DTC

Result:
Result Proceed to
DTC B1497 is output A
DTC B1441, B1442, B1443 and B1446 are output B
DTC B1441 is output C



A

B

REPLACE NO. 1 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY

C

2.INSPECT NO. 1 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY (MOTOR, LINK, DAMPER)
2.INSPECT NO. 1 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY (MOTOR, LINK, DAMPER)
a.

Check for a wire harness caught between the links of the motors and dampers.

OK:

No wire harnesses are caught between the links of the motors and dampers.



Result:
Proceed to
OK
NG



OK

3.INSPECT AIR CONDITIONING RADIATOR ASSEMBLY (DAMPER)

NG

REMOVE PINCHED WIRE HARNESS

3.INSPECT AIR CONDITIONING RADIATOR ASSEMBLY (DAMPER)
a.

Remove the No. 1 air conditioning radiator damper servo sub-assembly.

Click hereVehicle Interior>HEATING / AIR CONDITIONING>AIR CONDITIONING UNIT (for DENSO Made)>DISASSEMBLY


b.

Operate the dampers by hand.

OK:

The dampers are easily operated by hand.



Result:
Proceed to
OK
NG



OK

REPLACE NO. 1 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY

NG