Home › Vehicle Interior › SUPPLEMENTAL RESTRAINT SYSTEMS › STEERING PAD › from 2020.08
RM32H0E _58 Vehicle Interior _060061 SUPPLEMENTAL RESTRAINT SYSTEMS _0294192 STEERING PAD A

SUPPLEMENTAL RESTRAINT SYSTEMS  STEERING PAD  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The following procedure is for LHD vehicles.



PROCEDURE

Hide 45130 1.INSTALL HORN BUTTON ASSEMBLY

a.

Check that the ignition switch off.


b.

Check that the cable is disconnected from the negative (-) battery terminal.

CAUTION:
B422343

Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.



c.

for Single Type:

i.
B454021C01
0.948,0.865 1.385,1.031 true 1.156,1.542 1.479,1.25 true 1.792,0.979 2.177,0.781 true 2.094,3.094 2.385,2.802 true 0.875,1.521 1.115,1.719 0.24,0.198 10 true *a 2.229,0.688 2.469,0.885 0.24,0.198 10 true *d 0.677,0.698 0.917,0.896 0.24,0.198 10 true *b 1.917,3.073 2.156,3.271 0.24,0.198 10 true *c
*a Airbag Connector
*b Horn Connector
*c Airbag Connector Lock
*d Wire Harness Clamp


Engage the wire harness clamp.


ii.

Connect the airbag connector to the horn button assembly.

NOTICE:

When connecting any airbag connector, take care not to damage the airbag wire harness.



iii.

Push in the airbag connector lock to install the airbag connector.

NOTICE:

Securely lock the airbag connector lock.



iv.

Connect the horn connector to the horn button assembly.



d.

for Dual Type:

i.
B454022C01
0.958,0.896 1.385,1.031 true 1.531,1.281 1.135,1.479 1.135,1.479 1.385,1.188 true 1.781,1.01 2.198,0.844 true 2.615,2.99 2.115,3.083 2.115,3.083 2.302,2.646 true 0.844,1.479 1.073,1.677 0.229,0.198 10 true *a 0.698,0.76 0.927,0.958 0.229,0.198 10 true *b 2.219,0.74 2.448,0.938 0.229,0.198 10 true *d 1.948,3.042 2.156,3.24 0.208,0.198 10 false *c
*a Airbag Connector
*b Horn Connector
*c Airbag Connector Lock
*d Wire Harness Clamp


Engage the wire harness clamp.


ii.

Connect the 2 airbag connectors to the horn button assembly.

NOTICE:
·

When connecting any airbag connector, take care not to damage the airbag wire harness.

·

Be sure to connect the connectors to each corresponding color.




iii.

Push in the 2 airbag connector locks to install the 2 airbag connectors.

NOTICE:

Securely lock the airbag connector lock.



iv.

Connect the horn connector to the horn button assembly.



e.
B454023

Push the horn button assembly to engage the hooks carefully and install the horn button assembly.

NOTICE:
·

Make sure that the hooks are securely engaged to the omega springs.

·

Make sure to engage the upper hooks first.

·

Make sure that the horn button assembly is securely installed.




Hide 2.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Hide 3. INITIALIZATION AFTER RECONNECTING BATTERY TERMINAL

Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>WORK PROCEDURE

HINT:

When disconnecting and reconnecting the battery, there is an automatic learning function that completes learning when the respective system is used.

Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>AUTOMATIC LEARNING CHART


Hide 45130 4.INSPECT HORN BUTTON ASSEMBLY

a.

Make sure that the horn sounds.

If the horn does not sound, inspect the horn system.

Click hereVehicle Exterior>HORN>HORN SYSTEM>PROBLEM SYMPTOMS TABLE