2006-2011 Camry Aurion · Service Manual BODY ELECTRICAL

PROBLEM SYMPTOMS TABLE

Troubleshooting · Vehicles built Oct 2006 – May 2009

Versions by build date: Oct 2006 – May 2009 from Jun 2009

  1. Use the table below to help determine the cause of the problem symptoms. The potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.
  2. Inspect the fuses and relays related to this system before inspecting the suspected areas below.
SMART ENTRY AND START SYSTEM: 
Symptom
Suspected Area
See page
Entry lock/unlock does not operate.
1. Check for DTCs in the smart entry and start system (Starting function).
Click here
2. Refer to PROBLEM SYMPTOMS TABLE of the power door lock control system ("All doors cannot be locked/unlocked simultaneously by neither door control switch nor door key cylinder").
Click here
3. Courtesy light switch circuit
Click here
4. Lock position switch circuit
-
- Driver door
Click here
- Front passenger door
Click here
- Rear passenger door LH*
Click here
- Rear passenger door RH*
Click here
5. Entry lock switch circuit
Click here
6. Touch sensor circuit
Click here
7. Antenna circuit
Click here
8. Refer to "ID code matching inside the cabin cannot be performed".
-
9. Door oscillator circuit
Click here
10. Door control receiver circuit
Click here
11. Replace the main body ECU.
-
12. Replace the certification ECU.
-
Luggage compartment does not open (when the electrical key is outside the vehicle).
1. Check for DTCs in the smart entry and start system (Starting function).
Click here
2. Check if any function is cancelled due to customization.
Click here
3. Refer to PROBLEM SYMPTOM TABLE of the power door lock control system ("Luggage compartment door opener does not operate").
Click here
4. Operate the luggage compartment opener switch on the electrical key to check the wireless function.
Click here
5. Refer to PROBLEM SYMPTOMS TABLE of the wireless door lock control system ("The wireless door lock control system does not operate").
Click here
6. Check operation of the cabin oscillator in active test.
Click here
7. Luggage oscillator circuit
Click here
8. Door control receiver circuit
Click here
9. Luggage compartment opener switch circuit
Click here
10. Replace the main body ECU.
-
11. Replace the certification ECU.
-
All entry functions do not operate.
1. Registration of the key.
-
2. Certification ECU power source circuit
Click here
3. Replace the certification ECU.
-
Function to prevent electrical key confinement in the luggage compartment does not operate. (The luggage compartment does not open.)
1. Check for DTCs in the smart entry and start system (Starting function).
Click here
2. Power door lock control system
Click here
3. Courtesy light switch circuit
Click here
4. Lock position switch circuit
-
- Driver door
Click here
- Front passenger door
Click here
- Rear passenger door LH*
Click here
- Rear passenger door RH*
Click here
5. Check if any function is not cancelled due to customization.
Click here
6. Operate the LOCK/UNLOCK switch on the key to check the wireless function.
Click here
7. Refer to PROBLEM SYMPTOMS TABLE of the wireless door lock control system ("The wireless door lock control system does not operate").
Click here
8. Check operation of the cabin oscillator in the active test.
Click here
9. Luggage oscillator circuit
Click here
10. Door control receiver circuit
Click here
11. Replace the main body ECU.
-
12. Replace the certification ECU.
-
Function to prevent electrical key confinement in the luggage compartment does not operate. (The alarm does not sound.)
1. Check if the function to prevent electrical key confinement in the luggage compartment operates.
-
2. Check if answer back is performed when the wireless door lock is operated.
-
3. Door control receiver circuit
Click here
4. Replace the certification ECU.
-
The outside alarm of the answer back and entry systems does not sound.
1. Check if the function to prevent electrical key confinement in the luggage compartment operates.
-
2. Wireless door lock buzzer circuit
Click here
3. Door control receiver circuit
Click here
4. Replace the certification ECU.
-
The inside alarm of the entry system does not sound.
1. Operate the LOCK/UNLOCK switch on the electrical key to check the wireless function.
Click here
2. Refer to PROBLEM SYMPTOMS TABLE of the wireless door lock control system ("Wireless door lock function").
Click here
3. Check if the electrical key reminder buzzer sounds.
-
4. Replace the certification ECU.
-
ID code matching inside the cabin cannot be performed.
1. Check if any function is cancelled due to customization.
Click here
2. Operate the LOCK/UNLOCK switch on the key to check the wireless function.
Click here
3. Refer to PROBLEM SYMPTOMS TABLE of the wireless door lock control system ("The wireless door lock control system does not operate").
Click here
4. Check the cabin oscillator operation in the active test.
Click here
5. Room oscillator circuit
Click here
6. Luggage oscillator circuit
Click here
7. Door control receiver circuit
Click here
8. Replace the certification ECU.
-
ID code matching outside the cabin cannot be performed.
1. Check if any function is cancelled due to customization.
Click here
2. Operate the LOCK/UNLOCK switch on the electrical key to check the wireless function.
Click here
3. Refer to PROBLEM SYMPTOMS TABLE of the wireless door lock control system ("The wireless door lock control system does not operate").
Click here
4. Check operation of each door oscillator in active test.
Click here
5. Door oscillator circuit
Click here
6. Door control receiver circuit
Click here
7. Replace the certification ECU
-
Key reminder buzzer does not sound.
1. Check "D Door Courtesy SW" in the DATA LIST of the power door lock control system.
Click here
2. Check the key reminder buzzer when the engine switch is on (ACC) and the drivers door is opened.
-
3. Check if the steering wheel is locked when all power supplies are OFF and the drivers door is opened.
-
4. Refer to PROBLEM SYMPTOMS TABLE of the electrical steering lock ("Steering wheel cannot be locked").
Click here
5. Check that the "Lock Bar Stuck Error" item in the DATA LIST of the certification ECU displays OK.
Click here
6. Replace the steering lock ECU.
-
7. Replace the certification ECU.
-

HINT:
*: Only for RHD

← CUSTOMIZE PARAMETERS (from Oct 2006)PROBLEM SYMPTOMS TABLE (from Jun 2009) →