Home › Vehicle Interior › INTERIOR PANELS / TRIM › INSTRUMENT PANEL SAFETY PAD › 2013.07–2014.05
RM19V0EQ _58 Vehicle Interior _014615 INTERIOR PANELS / TRIM _0074204 INSTRUMENT PANEL SAFETY PAD A

INTERIOR PANELS / TRIM  INSTRUMENT PANEL SAFETY PAD  INSTALLATION  


PROCEDURE

Hide 1.INSTALL INSTRUMENT PANEL SAFETY PAD ASSEMBLY

a.

Engage the 5 guides and temporarily install the instrument panel safety pad assembly as shown in the illustration.

B280299

NOTICE:
·

Do not damage the instrument panel safety pad assembly.

·

Do not allow the wire harnesses to interfere with the surrounding parts.




b.

Install the 2 clips.


c.

Install the 3 bolts <B> and nut <F> or <G>.


d.

Install the 2 passenger airbag bolts <A>.

Torque:
20 N*m (204 kgf*cm, 15 ft.*lbf)


e.

Engage each clamp.


f.

Connect each connector.


Hide 55011A 3.INSTALL NO. 1 INSTRUMENT PANEL GARNISH SUB-ASSEMBLY

a.
B280295

Engage the 10 clips to install the No. 1 instrument panel garnish sub-assembly.


Hide 58816B 4.INSTALL CONSOLE BOX INSERT

a.

for RHD with Automatic Air Conditioning System:

i.

Engage the 2 claws to connect the room temperature sensor.



b.
B279902

Engage the clip and 3 guides.


c.

Install the console box insert with the 2 screws <C> or <D>.


Hide 58817A 5.INSTALL FRONT NO. 2 CONSOLE BOX INSERT

a.

for LHD with Automatic Air Conditioning System:

i.

Engage the 2 claws to connect the room temperature sensor.



b.
B280293

Engage the clip and 3 guides.


c.

Install the front No. 2 console box insert with the 2 screws <C> or <D>.


Hide 55480D 6.INSTALL LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY

a.

for LHD with Smart Entry and Start System:

i.

Connect the connector.



b.

Engage the 4 clips to install the lower instrument panel finish panel assembly.


Hide 86160P 7.INSTALL FRONT NO. 2 SPEAKER ASSEMBLY (for LH Side)

Hide 55408F 8.INSTALL NO. 1 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY

a.
B280307

Engage the 2 guides.


b.

Engage the 3 claws and 2 clips to install the No. 1 instrument panel speaker panel sub-assembly.


Hide 62212 9.INSTALL FRONT PILLAR GARNISH LH (w/o Curtain Shield Airbag)

Hide 62212 10.INSTALL FRONT PILLAR GARNISH LH (w/ Curtain Shield Airbag)

Hide 86160P 11.INSTALL FRONT NO. 2 SPEAKER ASSEMBLY (for RH Side)

HINT:

Use the same procedure as for the LH side.

Click hereAudio / Visual / Telematics>AUDIO / VIDEO>INSTRUMENT PANEL SPEAKER>INSTALLATION


Hide 55409F 12.INSTALL NO. 2 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY

a.
B279898

Engage the 2 guides.


b.

Engage the 3 claws and 2 clips to install the No. 2 instrument panel speaker panel sub-assembly.


Hide 62211 13.INSTALL FRONT PILLAR GARNISH RH (w/o Curtain Shield Airbag)

HINT:

Use the same procedure as for the LH side.

Click hereVehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING>INSTALLATION


Hide 62211 14.INSTALL FRONT PILLAR GARNISH RH (w/ Curtain Shield Airbag)

HINT:

Use the same procedure as for the LH side.

Click hereVehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING>INSTALLATION


Hide 55670 15.INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY

a.
B279895

Engage the 4 clips to install the No. 3 instrument panel register assembly.


Hide 55475A 16.INSTALL NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH

a.
B280311

Engage the 5 clips to install the No. 2 instrument cluster finish panel garnish.


Hide 55303B 17.INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY

a.
B281770

Engage the 2 clips and 4 guides.


b.

Install the 3 screws <C> or <D>.


c.

Close the lower instrument panel door.


d.

Install the lower instrument panel sub-assembly with the bolt <B> and screw <C> or <D>.


Hide 55607 18.INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

a.

Connect the connector.


b.

Engage the 2 guides and 4 claws to install the No. 2 instrument panel under cover sub-assembly.


Hide 55317A 19.INSTALL INSTRUMENT SIDE PANEL RH

a.

Engage the 3 guides.


b.
B279884

Engage the 4 claws to install the instrument side panel RH as shown in the illustration.


Hide 62311B 20.INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH

Hide 62111A 21.INSTALL COWL SIDE TRIM SUB-ASSEMBLY RH

HINT:

Use the same procedure as for the LH side.

Click hereVehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING>INSTALLATION


Hide 67911B 22.INSTALL FRONT DOOR SCUFF PLATE RH

HINT:

Use the same procedure as for the LH side.

Click hereVehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING>INSTALLATION


Hide 86160J 23.INSTALL FRONT NO. 3 SPEAKER ASSEMBLY (for 10 Speakers)

Hide 55510F 24.INSTALL NO. 1 SPEAKER OPENING COVER ASSEMBLY

a.

Connect the connector.


b.
B280310

Engage the 8 clips to install the No. 1 speaker opening cover assembly.


Hide 25.INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL WITH AIR CONDITIONING CONTROL ASSEMBLY (w/o Radio Receiver)

a.

Connect the connector.


b.

Engage the 10 clips to the vehicle body to temporarily install the center instrument cluster finish panel with air conditioning control assembly.


c.

Install the center instrument cluster finish panel with air conditioning control assembly with the 4 bolts.


Hide 26.INSTALL RADIO RECEIVER ASSEMBLY WITH AIR CONDITIONING CONTROL ASSEMBLY (w/o Navigation System)

Hide 27.INSTALL NAVIGATION RECEIVER ASSEMBLY WITH AIR CONDITIONING CONTROL ASSEMBLY (w/ Navigation System)

Hide 58804A 28.INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY

a.

Connect each connector.


b.

Engage the 4 clips and guide.


c.

Install the upper console panel sub-assembly with the 2 screws <C> or <D>.


Hide 58916 29.INSTALL BOX BOTTOM MAT

a.

Install the box bottom mat.


Hide 55660 30.INSTALL NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY

a.
B279891

Engage the 6 clips to install the No. 2 instrument panel register assembly.

NOTICE:

When installing the No. 2 instrument panel register assembly, check that the wire harness is not caught between the No. 2 instrument panel register assembly and duct.



Hide 31.INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY

a.

Connect the connector.


b.

Engage the clamp.


c.
B279878

Engage the 6 clips and 7 claws to install the center instrument cluster finish panel assembly.


Hide 32.INSTALL REAR CONSOLE BOX ASSEMBLY

Hide 58815A 33.INSTALL CONSOLE BOX CARPET

Hide 58864B 34.INSTALL NO. 4 CONSOLE BOX DUCT

Hide 58801E 35.INSTALL UPPER CONSOLE BOX SUB-ASSEMBLY

Hide 58805C 36.INSTALL REAR CONSOLE UPPER PANEL SUB-ASSEMBLY

a.

Connect each connector.


b.

Engage the 4 clips and install the rear console upper panel sub-assembly.


c.

Move the shift lever to P.


Hide 33504F 37.INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY

a.
B279871

Turn the shift lever knob sub-assembly clockwise to install the shift lever knob sub-assembly.


Hide 53921B 38.INSTALL FRONT PANEL GARNISH RH

a.

Engage the 3 claws, 2 clips and 8 guides to install the front panel garnish RH.


Hide 39.INSTALL LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL ASSEMBLY (for LHD)

a.

Engage the 5 clips and 3 guides.


b.

Install the lower No. 1 instrument panel finish panel assembly with the 2 bolts <B>.


Hide 40.INSTALL LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL ASSEMBLY (for RHD)

a.

Engage the 4 claws, 9 clips and 3 guides.


b.

Install the lower No. 1 instrument panel finish panel assembly with the 2 bolts <B>.


Hide 53601 41.CONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY

a.

Engage the claw and 2 guides to connect the hood lock control lever sub-assembly.


Hide 53922B 42.INSTALL FRONT PANEL GARNISH LH

a.

Engage the 3 claws, 2 clips and 8 guides to install the front panel garnish LH.


Hide 83100 43.INSTALL COMBINATION METER ASSEMBLY

Hide 55410C 44.INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY

a.
B292372

Temporarily install the instrument cluster finish panel assembly as shown in the illustration.


b.

Connect each connector.


c.

Engage the 5 claws, 5 clips and 2 guides to install the instrument cluster finish panel assembly.


d.
B279861

Engage the 2 claws, 4 clips and 2 guides.


Hide 55650 45.INSTALL NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY

a.
B292374

Engage the 4 clips to install the No. 1 instrument panel register assembly.


Hide 55474C 46.INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH (for LHD)

a.
B292375

Engage the 3 clips to install the No. 1 instrument cluster finish panel garnish.


Hide 55431B 47.INSTALL UPPER INSTRUMENT PANEL FINISH PANEL (for RHD)

a.

w/ Smart Entry and Start System:

i.

Connect the connector.



b.
B292352

Engage the 4 clips to install the upper instrument panel finish panel.


Hide 55318C 48.INSTALL INSTRUMENT SIDE PANEL LH

a.

Engage the 3 guides.


b.
B292373

Engage the 4 claws to install the instrument side panel LH as shown in the illustration.


Hide 62312B 49.INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH

Hide 62112A 50.INSTALL COWL SIDE TRIM SUB-ASSEMBLY LH

Hide 67914 51.INSTALL FRONT DOOR SCUFF PLATE LH

Hide 52.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION