16400
1.INSTALL RADIATOR ASSEMBLY
| *a | Guide |
Install the fan assembly to the radiator with the 2 guides at the bottom and 3 claws on the top.
Install the 2 lower radiator supports to the radiator assembly.
Install the radiator with fan assembly.
Do not apply any excessive force to the cooler condenser assembly or pipe when installing the radiator assembly.
Install the condenser assembly with the 4 bolts.
Connect the 2 connectors and the 2 clamps.
53216A
2.INSTALL UPPER RADIATOR SUPPORT
Install the 2 radiator support cushions to the radiator assembly.
Install the upper radiator support with the 5 bolts and connect the hood lock control cable clamp to the upper radiator support.
Connect the 2 connectors. (for LHD)
Connect the connector. (for RHD)
53510
3.INSTALL HOOD LOCK ASSEMBLY (for LHD)
53510
4.INSTALL HOOD LOCK ASSEMBLY (for RHD)
32942
5.CONNECT OUTLET NO. 1 OIL COOLER HOSE (w/ Oil Cooler)
Connect the outlet No. 1 oil cooler hose.
32941
6.CONNECT INLET NO. 1 OIL COOLER HOSE (w/ Oil Cooler)
Connect the inlet No. 1 oil cooler hose.
16572D
7.CONNECT NO. 2 RADIATOR HOSE
Connect the No. 2 radiator hose and clamp.
16571C
8.CONNECT NO. 1 RADIATOR HOSE
Connect the No. 1 radiator hose.
16470
9.INSTALL RADIATOR RESERVE TANK ASSEMBLY
Install the radiator reserve tank with the 2 bolts.
Connect the radiator reserve tank hose.
17750A
10.INSTALL INLET AIR CLEANER ASSEMBLY
11.INSTALL FRONT BUMPER ASSEMBLY
12.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
When disconnecting the cable, some systems need to be initialized after the cable is reconnected.
Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION
13.ADD ENGINE COOLANT
14.INSPECT FOR COOLANT LEAK
51442C
15.INSTALL ENGINE UNDER COVER LH
51441C
16.INSTALL ENGINE UNDER COVER RH
53852K
17.INSTALL FRONT WHEEL OPENING EXTENSION PAD LH (for RHD)
53851Z
18.INSTALL FRONT WHEEL OPENING EXTENSION PAD RH (for RHD)