Home › Vehicle Interior › HEATING / AIR CONDITIONING › SOLAR SENSOR › from 2015.04
RM19V0EQ _58 Vehicle Interior _014613 HEATING / AIR CONDITIONING _0074194 SOLAR SENSOR A

HEATING / AIR CONDITIONING  SOLAR SENSOR  REMOVAL  


PROCEDURE

Hide 1. PRECAUTION

NOTICE:

After turning the ignition switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notices before proceeding with work.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION


Hide 2.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL (w/ Navigation System)

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION


Hide 3.REMOVE REAR CONSOLE BOX ASSEMBLY

Hide 4.REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY

Hide 55660 5.REMOVE NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY

Hide 58804A 7.REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY

Hide 8.REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL WITH AIR CONDITIONING CONTROL ASSEMBLY (w/o Radio Receiver)

Hide 9.REMOVE RADIO RECEIVER ASSEMBLY WITH AIR CONDITIONING CONTROL ASSEMBLY (w/o Navigation System)

Hide 10.REMOVE NAVIGATION RECEIVER ASSEMBLY WITH AIR CONDITIONING CONTROL ASSEMBLY (w/ Navigation System)

Hide 55510F 11.REMOVE NO. 1 SPEAKER OPENING COVER ASSEMBLY

Hide 89120A 12.REMOVE SOLAR SENSOR (AUTOMATIC LIGHT CONTROL SENSOR)

a.
E226684

Disengage the 2 claws and remove the solar sensor (automatic light control sensor).