DTC B2335 Lost Communication with Immobiliser System |
| DTC No. | DTC Detection Condition | Trouble Area |
| B2335 | The remote engine starter ECU does not receive remote engine starter ID from the certification ECU (smart key ECU assembly). |
|
| 1.CHECK DTC OUTPUT |
Clear the DTC (Click here).
Perform the remote engine start operation.
Check for DTCs.
|
| ||||
| OK | |
| 2.REPLACE REMOTE ENGINE STARTER ECU |
Temporarily replace the remote engine starter ECU with a new one (Click here).
| NEXT | |
| 3.REGISTER REMOTE ENGINE STARTER ID |
Register the remote engine starter ID (Click here).
| NEXT | |
| 4.CHECK DTC OUTPUT |
Clear the DTC (Click here).
Perform the remote engine start operation.
Check for DTCs.
|
| ||||
| OK | ||
| ||
| 5.REPLACE CERTIFICATION ECU (SMART KEY ECU ASSEMBLY) |
Temporarily replace the certification ECU (smart key ECU assembly) with a new one (Click here).
| NEXT | |
| 6.PERFORM REGISTRATION |
Register the key and ECU communication ID (Click here).
Register the remote engine starter ID (Click here).
| NEXT | |
| 7.CHECK DTC OUTPUT |
Clear the DTC (Click here).
Perform the remote engine start operation.
Check for DTCs.
|
| ||||
| OK | ||
| ||