Home › Drivetrain › U660E AUTOMATIC TRANSMISSION / TRANSAXLE › TRANSMISSION CONTROL CABLE
RM2030EQ _52 Drivetrain _014643 U660E AUTOMATIC TRANSMISSION / TRANSAXLE _0074469 TRANSMISSION CONTROL CABLE A

U660E AUTOMATIC TRANSMISSION / TRANSAXLE  TRANSMISSION CONTROL CABLE  REMOVAL  


PROCEDURE

Hide 53295E 1.REMOVE COOL AIR INTAKE DUCT SEAL

Hide 17752 2.REMOVE INLET NO. 2 AIR CLEANER

Hide 3.REMOVE AIR CLEANER CAP SUB-ASSEMBLY

Hide 17801 4.REMOVE AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY

Hide 5.REMOVE AIR CLEANER CASE SUB-ASSEMBLY

Hide 78110K 7.REMOVE ACCELERATOR PEDAL SENSOR ASSEMBLY (for LHD)

Hide 46410 8.DISCONNECT NO. 1 PARKING BRAKE CABLE ASSEMBLY (for LHD)

a.

Turn back the floor carpet.


b.
C240462

Remove the bolt and nut, and disconnect the No. 1 parking brake cable assembly.


Hide 33820B 9.REMOVE TRANSMISSION CONTROL CABLE ASSEMBLY (for LHD)

a.

Move the shift lever to N.


b.
C239451

Disconnect the end of the transmission control cable assembly from the lower shift lever assembly.


c.

Disengage the 2 claws and disconnect the transmission control cable assembly from the lower shift lever assembly.


d.
C239656

Disconnect the wire harness clamp.


e.
C239668

Remove the nut and clip, and disconnect the transmission control cable assembly.


f.
C240463

Turn back the dash panel insulator.


g.

Remove the 2 bolts and pull out the transmission control cable assembly from the cabin.


Hide 33820B 10.REMOVE TRANSMISSION CONTROL CABLE ASSEMBLY (for RHD)

a.

Move the shift lever to N.


b.
C240495

Disconnect the end of the transmission control cable assembly from the lower shift lever assembly.


c.

Disengage the 2 claws and disconnect the transmission control cable assembly from the lower shift lever assembly.


d.
C239655

Disconnect the wire harness clamp.


e.
C239668

Remove the nut and clip, and disconnect the transmission control cable assembly.


f.

Turn back the floor carpet.


g.
C241623C06
0.927,1.823 1.292,1.615 1.292,1.615 1.438,1.615 false 2.552,1.25 2.792,0.74 2.792,0.74 2.948,0.74 false 1.552,1.563 1.833,1.76 0.281,0.198 10 false *2 2.958,0.656 3.177,0.833 0.219,0.177 10 false *1
*1 No. 1 parking brake cable assembly
*2 Transmission control cable assembly


Remove the bolt and disconnect the No. 1 parking brake cable assembly.


h.

Turn back the dash panel insulator.


i.

Remove the 2 bolts and pull out the transmission control cable assembly from the cabin.